Humminbird 585C manual Select Readouts, Depth Offset, Temp Offset, Speed Calibration

Page 22

FF585c_Man_English_531363-1_B.qxd 12/27/2004 8:33 PM Page 42

Select Readouts

Default Sonar View

Select Readouts

(Advanced, Sonar View Only)

Select Readouts sets individual digital readouts on the Sonar View. This Advanced feature allows you to select what data will be displayed in each of 5 fixed-position data windows arranged around the left and bottom edges of the Sonar View screen, or whether a particular window will be turned off, displaying nothing in that area; you can access this menu choice only when in Advanced User Mode (see Setup Menu Tab: User Mode.)

Data windows can display readouts from supported accessories such as Temp/Speed. Each data window can either be empty or contain one of the following:

-Speed (will only be displayed if a Temp/Speed Accessory is attached and the paddlewheel has moved at least once)

-Temperature

-Triplog (will only be displayed if a Temp/Speed Accessory is attached and the paddlewheel has moved at least once)

-Voltage.

To Select Readouts:

1.Make sure you are in Advanced User Mode, then highlight Select Readouts on the Setup main menu.

2.Use the RIGHT 4-Way Cursor Control key to initiate this procedure.

3.The Select Readouts submenu will appear, showing a list of all Readouts. Use the UP or DOWN Cursor keys to select a particular Readout position, then use the RIGHT or LEFT Cursor keys to change what will be displayed at that position. (Off, Speed, Temperature, Triplog, Voltage)

Depth Offset

(Advanced)

Depth Offset will adjust the digital depth readout to indicate depth from the waterline or boat's keel. Enter a positive vertical measurement from the transducer to the waterline to read the depth from the waterline. Enter a negative vertical measurement from the transducer to keel to read the depth from the keel. This menu choice is available only when in Advanced User Mode (see Setup Menu Tab: User Mode.)

To change the Depth Offset setting:

1.Make sure you are in Advanced User Mode, then highlight Depth Offset on the Setup menu.

2.Use the LEFT or RIGHT 4-Way Cursor Control keys to change the Depth Offset setting. (-10.0 to +10.0 or -3 to 3 meters [International Models Only], Default = 0)

Temp Offset

(Advanced)

Temp Offset will adjust the temperature readout by the amount entered. This menu choice is available only when in Advanced User Mode (see Setup Menu Tab: User Mode.)

To change the Temp Offset setting:

1.Make sure you are in Advanced User Mode, then highlight Temp Offset on the Setup menu.

2.Use the LEFT or RIGHT 4-Way Cursor Control keys to change the Temp Offset setting. (-10.0 to +10.0 , Default = 0)

Speed Calibration

(Advanced, with Temp/Speed Only)

Speed Calibration will adjust the speed readout by the percentage entered, and will only appear in the menu if a Temp/Speed Accessory is connected and the paddlewheel has moved at least once when the unit is in Advanced User Mode (see Setup Menu Tab: User Mode.)

To change the Speed Calibration setting:

1. Make sure you are in Advanced User Mode, then highlight Speed Calibration on

the Setup menu.

2. Use the LEFT or RIGHT 4-Way Cursor Control keys to change the Speed Calibration

Customized Sonar View

setting. (-20% to +20%, Default = 0%)

36

37

Page 21 Page 23
Image 22
Page 21 Page 23
Contents FishFinder 585c Operations Manual Thank You Table of Contents How Sonar Works TroubleshootingSingle Beam Sonar High Sonar Intensity Return Bait Ball 200 kHz, Orange Fish SymbolWhat’s On the Display RTS Real Time Sonar WindowUnderstanding Sonar History ViewsSonar View Real Time Sonar RTS WindowSonar Zoom View Big Digits ViewKey Functions POWER/LIGHT KeyBottom Presentation View KeyWay Cursor Control Key Powering Up the UnitMenu Key Exit KeyStart-Up Options Menu Exit Normal operation by powering your FishFinder offNormal Operation Simulator Exit the Simulator by powering your FishFinder offSystem Status Sensitivity To adjust the SensitivitySonar X-Press Menu Highlight Sensitivity on the Sonar X-Press menuLower Range Chart SpeedUpper Range Bottom ViewSonar Menu Tab To adjust the Zoom LevelZoom Level Highlight Zoom Level on the Sonar X-Press menuFish ID+ To change the Fish Sensitivity settingTo change the RTS Window setting Fish SensitivityDepth Lines To change the Depth Lines settingTo change the Surface Clutter setting Surface ClutterMax Depth Noise FilterWater Type Fish ID Alarm Alarms Menu TabDepth Alarm To change the Depth Alarm settingAlarm Tone Low Battery AlarmTemp Alarm Setup Menu TabUnits Temp User ModeUnits Depth Units DistanceRestore Defaults Triplog ResetSelect Views Temp Offset Select ReadoutsDepth Offset Speed CalibrationDisplay Problems TroubleshootingProblem Possible Cause Specifications Humminbird Fishfinder AccessoriesFinding the Cause of Noise Contact Humminbird
Top Page Image Contents