Humminbird 343c manual Depth Alarm, Fish ID Alarm, Low Battery Alarm, Temp Alarm

Page 24

531447-1_A_343c_Eng.qxd 11/11/2005 9:18 PM Page 46

Depth Alarm

Depth Alarm sounds when the depth becomes equal to or less than the menu setting.

To change the Depth Alarm setting:

1.Highlight Depth Alarm on the Alarms main menu.

2.Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Depth Alarm setting. (OFF, 1 to 100 feet, or 0.5 to 30 meters [International Models only], Default = OFF)

Fish ID Alarm

Fish ID Alarm sounds when the Fishing System detects fish that correspond to the alarm setting. Fish ID Alarm will only sound if Fish ID+TM is on.

For example, if you've set the Fish ID Alarm to sound for Large fish only, the Fish ID alarm will sound when a large-sized fish is detected.

To change the Fish ID Alarm setting:

1.Highlight Fish ID Alarm on the Alarms main menu.

2.Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Fish ID Alarm setting. (Off, All, Large/Medium, Large, Default = Off)

Off

Large

Large/Medium

All

Low Battery Alarm

Low Battery Alarm sounds when the input battery voltage is equal to or less than the menu setting. The battery alarm will only sound for the battery that is connected to the 300 Series™ Fishing System. The Low Battery Alarm should be set to warn you when the battery voltage drops below the safety margin that you have determined. For instance, if you are running a trolling motor (battery operated), you would want to set the Low Battery Alarm to sound before the battery voltage drops too low for it to be used to start your main, gasoline-powered engine.

To change the Low Battery Alarm setting:

1.Highlight Low Battery Alarm on the Alarms main menu.

2.Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Low Battery Alarm setting. (Off, 8.5V - 13.5V, Default = Off)

Temp Alarm

Temp Alarm sounds when the water temperature detected by the 300 series™ reaches the Temp Alarm setting, which is either set in degrees Fahrenheit or Celsius [International Models only]. For example, if the Temp Alarm is set to 58 degrees Fahrenheit, and the water temperature falls from 60 degrees to 58 degrees, the Temp Alarm will sound. Similarly, if the water temperature rises from 56 degrees to 58 degrees, the Temp Alarm will also sound.

To change the Temp Alarm setting:

1.Highlight Temp Alarm on the Alarms main menu.

2.Use the LEFT or RIGHT 4-Way Cursor Control keys to change the Temp Alarm setting. (Off, 33-120 [Fahrenheit], 0-50 [Celsius], Default = Off)

41

42

Page 23 Page 25
Image 24
Page 23 Page 25
Contents 343c Operations Manual Table of Contents Thank YouAlarms Menu Tab Setup Menu TabTroubleshooting Specifications Glossary Contact HumminbirdHow Sonar Works DualBeam Plus Sonar What’s On the Display High Sonar Intensity Return Bait BallViews Sonar ViewUnderstanding Sonar History Real Time Sonar RTS WindowFreeze Frame Bottom Presentation Sonar Zoom View 200/83 kHz Split Sonar ViewPOWER/LIGHT Key Big Digits ViewKey Functions Circular Flasher ViewMenu Key WAY Cursor Control KeyExit Key Powering Up the Unit Menu SystemExit Normal operation by powering your Fishing System off Start-Up Options MenuNormal Operation Normal Simulator System StatusSelf Test Accessory Test Exit the Simulator by powering your Fishing System offExit System Status by powering your Fishing System off SimulatorTo adjust the Sensitivity Sonar X-PressTMMenuSensitivity Highlight Sensitivity on the Sonar X-PressTMMenuTo adjust the Upper Range To adjust the Lower RangeUpper Range Lower RangeChart Speed Zoom LevelBottom Lock Bottom RangeSonar Menu Tab Beam SelectTo use Beam Select Highlight Beam Select on the Sonar main menuTo change the Fish ID Sensitivity setting To change the RTS Window settingFish ID+TM Fish ID SensitivityBottom View Zoom WidthKHz Sensitivity Depth LinesSurface Clutter Noise FilterMax Depth Alarms Menu Tab To change the Water Type settingWater Type Depth Alarm Fish ID AlarmLow Battery Alarm Temp AlarmAlarm Tone Setup Menu TabTo change the Alarm Tone setting Highlight Alarm Tone on the Alarms main menuUser Mode Units DepthUnits Temp Units DistanceTriplog Reset Restore DefaultsSelect Views Select Readouts Depth OffsetTemp Offset Troubleshooting To change the Speed Calibration settingSpeed Calibration Display Problems Problem Possible CauseFinding the Cause of Noise IsolationSpecifications GlossarySonar Terms 531447-1A343cEng.qxd 11/11/2005 918 PM 531447-1A343cEng.qxd 11/11/2005 918 PM Receiver See Transmitter 531447-1A343cEng.qxd 11/11/2005 918 PM Contact Humminbird
Top Page Image Contents