ASSEMBLY
| End of |
Steering | Steering |
Column | Column |
Cap |
|
Steering
Rod Hole
8BOTTOM VIEW
•Turn the vehicle on its side.
•Insert the end of the steering column through the hole in the steering rod.
•Fit the steering column cap onto the end of the steering column.
Hood
Latch
Slot
| Hood |
| Latch |
10 | Slot |
FRONT VIEW |
•Insert a hood latch into one of the slots in the front end of the vehicle.
•Twist the base of the hood latch 1/4 turn to secure it in the vehicle.
•Repeat this procedure to attach the other hood latch to the vehicle.
Steering
Column Cap 
#10 x 3/4"
(1,9 cm) Screw
Hood
Tabs
Slot | Slot |
9
•Insert a #10 x 3/4" (1,9 cm) screw through the large opening in the steering column cap and into the hole in the steering column. Tighten the screw.
•Turn the vehicle upright.
11
•Insert the tabs on the hood into the slots in the front end of the vehicle.
•Pull the hood forward and lower it closed.
10 |