ASSEMBLY
Windshield
Large | Large |
Tab | |
| Tab |
| Large Slots |
12
•Position the windshield so that the molded detail on the wipers faces the front end of the vehicle.
•Insert and “snap” the two large tabs on the windshield into the large slots in the dash.
•Pull up on the windshield to be sure it is secure.
Front Bumper
Brush Guard
13
•Fit and hold the brush guard against the front bumper.
•Insert two #10 x 3/4" (1,9 cm) screws into the brush guard and tighten.
ASpacers
Grille
B #8 x 3" (7,6 cm) Screws
14
•Fit two spacers between the grille and the back of the brush guard, as shown A .
•Insert two #8 x 3" (7,6 cm) screws through the inside of the headlight, the spacers and into the holes in the
grille B . Tighten the screws.
Headlights
Brush Guard | Light |
| Covers |
15
•Fit the light covers to the headlights.
•Insert a #10 x 3/4" (1,9 cm) screw into each light cover. Tighten the screws.
11 |