NOTE: Fuses and Wires
Regulations may require that the Model 833 be | ! |
fused. If installing a fuse, use a 10A fuse wired with |
1.5mm or equivalent wire. The voltage drop across the fuse, its holder, and connectors must be less than 1% of the nominal system voltage.
Discharge Adjustments
Table 3 lists the voltages per cell under load that correspond to an empty indication on the gauge (lockout point).
Table 3. Discharge Adjustment Settings
Setting | Volt/Cell at Empty |
K1.57
L1.63
M1.68
N1.73 (factory setting)
O1.78
P1.82
Q1.84
R1.86
S1.89
T1.91
U1.93
11