Curtis Computer 833 manual Operation, Display, LCD Hour Meter

Page 16

4. OPERATION

Display

The Curtis Model 833 combines in one instrument a completely solid state LED battery state-of-charge indicator, an LCD hour meter, and lift lockout.

Only when battery is properly charged is right

most LED (1) lit. As battery’s state-of-charge decreases, successive LEDs

light up, one at a time.

2nd from left LED flashes indicating “energy reserve” (70% discharged).

The left most 2 LEDs flash indicating “empty” (80% depth of dis- charge). At this point, lift lockout occurs.

LCD Hour Meter

14

Image 16
Contents Model Read Instructions CarefullySafety Instructions Table of Contents Model Encodement 833RB VvvvZzzz Technical Specifications Electrical Operating RangeOperating Current Relay Contact RatingsResolution Mechanical DisplayHardware Kit Panel CutoutEnvironmental TemperatureShock Installation Pin 8 = Battery +Pin 2 = Keyswitch Pin 5 = BatteryPins 1, 2, 6 & 7 = Hour Meter Control + Pin 3 = Relay + Pin 4 = RelaySwitch Meter ModelHigh Voltage Maximum MinimumDischarge Adjustments SettingCurtis Model 833 Rear View Connections for Typical Model 833 Application Display OperationLCD Hour Meter Push-to-read Troubleshooting Problem Possible CausesMaintenance All specifications are subject to change Without notice Curtis INSTRUMENTS, INC Kisco Avenue, Mt. Kisco, NY 10549 Tel 666-2971 FAX 914