11. Maintenance and Storage
11. Maintenance and Storage
• Clean the unit with a cloth lightly dampened with water, disinfectant alcohol or detergent, then wipe it dry with a dry cloth. Do not wipe the SD memory card slot cover.
• Wipe the electrodes using a cloth dampened with disinfectant alcohol.
• Do not wipe the unit with benzene, gasoline, paint thinner, concentrated alcohol, or other volatile detergents.
•Do not place objects on top of the unit. This could damage the unit.
•Do not disassemble the unit. There are no user serviceable parts. Repairs should only be carried out by authorized personnel.
•Do not sterilise this unit in an autoclave, ultraviolet steriliser or gas steriliser (EOG, formaldehyde, high density ozone etc.)
•This device does not require calibration during the expected life cycle of five years.
EN
51