Pelco C521M operation manual Risk of Electric Shock Do not Open

Page 5

INSTALLATION/OPERATION MANUAL AZL–AZMITH AND ELEVATION READ-OUT METER

1.0 WARNINGS

Prior to installation and use of this product, the following WARNINGS should be observed.

1.Installation and servicing should only be done by Qualified Service Personnel and conform to all Local codes.

2.Unless the unit is specifically marked as a NEMA Type 3, 3R, 3S, 4, 4X, 6, or 6P enclosure, it is designed for indoor use only and it must not be installed where exposed to rain and moisture.

3.Only use replacement parts recommended by Pelco.

4.After replacement/repair of this unit’s electrical components, conduct a resistance measurement between line and exposed parts to verify the exposed parts have not been connected to line circuitry.

Theproduct may bear the following marks:

This symbol indicates that dangerous voltage constituting a risk of electric shock is present within this unit.

CAUTION:

TO REDUCE THE RISK OF ELECTRICAL SHOCK, DO NOT REMOVE COVER. NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

This symbol indicates that there are important operating and maintenance instructions in the literature accompanying this unit.

CAUTION:

RISK OF ELECTRIC SHOCK.

DO NOT OPEN.

Please thoroughly familiarize yourself with the information in this manual

prior to installation and operation.

Pelco Manual C521M (6/95)

1

Image 5
Contents AZL-Azmith and Elevation Table of Contents Manual # Date Comments C521M Original version List of IllustrationsRevision History This page intentionally left blank Pelco Manual C521M 6/95 Risk of Electric Shock Do not Open Connector Installation InstallationScope DescriptionAZL Wiring Diagram Pelco Manual C521M 6/95 AZL Front and Rear Views AZL Meter Adjustment 4.2.1 Preliminary RemarksMeter Adjustment Pelco Manual C521M 6/95 Pan Meter AdjustmentSpecifications Tilt Meter AdjustmentElectrical OperationPelco Manual C521M 6/95 Returns Warranty and Return Information