Pelco C521M operation manual Tilt Meter Adjustment, Specifications, Electrical, Operation, General

Page 10

4.2.3 Tilt Meter Adjustment

6.0 SPECIFICATIONS

Use the same methods for the tilt adjustment as those

ELECTRICAL

 

just employed for the pan meter adjustment.

 

 

 

Input Voltage:

120 VAC, 50/60 Hz

Once the procedure is complete, the extreme electrical

 

 

rotation limits can be reset down from the factory maxi-

Power Cord:

3-wire grounded #18 Awg

mum settings.

 

 

5.0 OPERATION

Fuse Protection:

F1--3A

 

F2--2/10ASB

When power is applied to the unit the power LED on

Connectors:

14-pin AMP CPC connector

the front panel lights.

 

120 VAC convenience outlet

The pan and tilt meters on the front of the AZL unit

GENERAL

 

will give a direct, visual, real-time readout, in degrees,

 

 

of the physical orientation of the pan/tilt to which it has

Construction

 

been electrically connected.

Cover:

Steel, powder-coated, black

 

Chassis:

Metal sheet, galvanized

 

Panel

 

 

Front:

Aluminum, black, white silk screen

 

Rear:

Alodine aluminum plate

 

Dimensions:

3.0"H x 15.55"W x 10.19"D

 

 

(7.62 cm x 39.50 cm x 25.88 cm)

 

Weight:

12 lbs (5.4 kg)

6

Pelco Manual C521M (6/95)

Image 10
Contents AZL-Azmith and Elevation Table of Contents Revision History List of IllustrationsManual # Date Comments C521M Original version This page intentionally left blank Pelco Manual C521M 6/95 Risk of Electric Shock Do not Open Scope InstallationConnector Installation DescriptionAZL Wiring Diagram Pelco Manual C521M 6/95 AZL Meter Adjustment 4.2.1 Preliminary Remarks AZL Front and Rear ViewsPan Meter Adjustment Meter Adjustment Pelco Manual C521M 6/95Electrical Tilt Meter AdjustmentSpecifications OperationPelco Manual C521M 6/95 Warranty and Return Information Returns