Station Hunting, Add-On Module | NEC NEAX2400IMX specs

OVERVIEW

Add-On Module

The following features cannot be used when a DSS/BLF console encounters a busy station.

•CALL BACK

•CALL WAITING

•EXECUTIVE RIGHT-OF-WAY

•STEP CALL

A station user cannot activate the following features for an incoming call from a DSS/BLF console. Note

•CALL FORWARDING-OUTSIDE (including ALL CALLS, BUSY LINE, DON’T ANSWER)

•MULTIPLE CALL FORWARDING (including ALL CALLS, BUSY LINE, DON’T ANSWER)

•STATION HUNTING

Note: UNIFORM CALL DISTRIBUTION can be activated for an incoming call from a DSS/BLF as usual when this feature has been set to the terminal.

7.Add-On Module

A maximum of 48 lines and 12 feature keys may be programmed for an Add-On Module. One Add-On Module occupies only one port on an ELC/DAI card.

When a DSS console is used as an Add-On Module, be sure to assign the DSS console to a specific LEN whose level (LV) is an odd number (LV = 1, 3, 5, 7). Also, the Dterm used in conjunction with the Add-On Module

must be assigned to the preceding even-numbered LEN level (LV = 0, 2, 4, 6).

Table 1-5 Level Assignment Conditions for the Add-On Module Mode

	LEVEL NUMBER	CONDITIONS

	2n + 1	Add-On Modules are connected.

	2n	The Dterms which use keys on the Add-On Modules as additional Line Feature
	2n	access keys are connected.
		access keys are connected.

Note: In Table 1-5, “n” represents 0, 1, 2, 3.

CHAPTER 1

ND-70684 (E)

Page 10

Revision 1.0