OVERVIEW
DSS Console Modes
3.DSS Console Modes
The DSS can be used as a Direct Station Selection/Busy Lamp Field (DSS/BLF) or an
•Level Number (even or odd) of the allocated LENs for the DSS console
•Office Data programming
3.1Direct Station Selection/Busy Lamp Field (DSS/BLF ) Mode
In this mode, a DSS console is used with a Dterm that receives a Direct Inward Dialing (DID) and/or Direct- In Termination (DIT) call. When the DSS console receives a call, the Dterm user can transfer the incoming call to a preassigned destination by pressing the appropriate key on the console. The caller is automatically placed on hold. This function is called the Direct Station Selection (DSS). Each key on the console has a
Light Emitting Diode (LED) to indicate the Busy/Idle status of each assigned station so the DSS can also provide a Dterm user with the Busy Lamp Field (BLF) function.
•DSS function: Dterm user can transfer call to a preassigned destination by press- ing a DSS key on the console.
•BLF function: Dterm user can monitor Busy/Idle status of preassigned stations.
|
| 0 0 | 0 1 | 02 | 0 3 | 0 4 | 0 5 |
|
| 0 6 | 0 7 | 08 | 0 9 | 1 0 | 11 |
|
| 1 2 | 1 3 | 14 | 1 5 | 1 6 | 1 7 |
|
| 1 8 | 1 9 | 20 | 2 1 | 2 2 | 2 3 |
|
| 2 4 | 2 5 | 26 | 2 7 | 2 8 | 2 9 |
1 | 2 | 3 0 | 3 1 | 32 | 3 3 | 3 4 | 3 5 |
3 |
|
|
|
|
| ||
4 | 5 | 3 6 | 3 7 | 38 | 3 9 | 4 0 | 4 1 |
6 |
|
|
|
|
| ||
7 | 8 | 4 2 | 4 3 | 44 | 4 5 | 4 6 | 4 7 |
9 |
|
|
|
|
| ||
| 0 | 4 8 | 4 9 | 50 | 5 1 | 5 2 | 5 3 |
| # |
|
|
|
|
| |
|
| 5 4 | 5 5 | 56 | 5 7 | 5 8 | 5 9 |
DSS/BLF
When a station that has been assigned to this DSS/BLF is busy, the associated LED lights red. In this example, station 304 is busy.
BUSY INDICATION (RED)
300 |
|
|
|
| 304 |
|
DSS
KEY
Figure 1-2 Direct Station Selection (DSS)/Busy Lamp Field (BLF) Mode
ND-70684 (E)CHAPTER 1
Page 3