NEC P401, P461 Power Indicator, Using Power Management, Selecting a video source, Picture Aspect

Power Indicator

	Mode	Status Indicator Light
Power ON		Green*2
Power OFF (Eco Standby)*1		Red
Power consumption under 0.5W*3
Power OFF (Standby)		Amber
Power consumption under 1W*3, *4
Power Save		Amber Blinking
Power consumption under 2W*3, *5
Power Standby when		Green and Amber blink alternately
ÒSCHEDULE SETTINGSÓ enabled
Diagnosis (Detecting failure)		Red Blinking
		(See Troubleshooting page 34)
*1	When in Eco Standby Mode DDC/CI control does not function.
*2	If ÒOFFÓ is selected in POWER INDICATOR (page 23), the LED will not light when
	the LCD monitor is in active mode.
*3	ÒRS-232CÓ is selected in EXTERNAL CONTROL.
*4	DDC/CI should be disabled.
*5	No DisplayPort connection.

Using Power Management

The LCD monitor follows the VESA approved DPM Display Power Management function.

The power management function is an energy saving function that automatically reduces the power consumption of the display when the keyboard or the mouse has not been used for a fixed period.

The power management feature on your new display has been set to the ÒONÓ mode. This allows your display to enter a Power Saving Mode when no signal is applied. This could potentially increase the life and decrease the power consumption of the display.

NOTE: Depending on the PC and video card used, this function may not operate.

Selecting a video source

To view a video source:

Use the input button to set [VIDEO1], [VIDEO2], [S-VIDEO].

Use the COLOR SYSTEM menu to set [AUTO], [NTSC], [PAL], [SECAM], [PAL60], [4.43NTSC], according to your video format.

Picture Aspect

DVI, VGA, RGB/HV, DPORT

FULL ZOOM NORMAL

HDMI, DVD/HD1, DVD/HD2, SCART, VIDEO1, VIDEO2, S-VIDEO, TV*

FULL WIDE ZOOM NORMAL

Aspect ratio Unchanged view*6	Recommended selection
of image	for picture aspect*6
	NORMAL
4:3	ZOOM
	(DYNAMIC)

FULL

Squeeze

WIDE

Letterbox

*6 Grey areas indicate unused portions of the screen.

NORMAL: Displays the aspect ratio the same as it is sent from the source.

FULL: Fills entire screen.

WIDE: Expands a 16:9 letter box signal to fill entire screen.

ZOOM (DYNAMIC): Expands a 4:3 pictures to fill the entire screen with non-linearity. Some of the outside image area will be cut off due to expansion.

ZOOM

The image can be expanded beyond the active display area. The image which is outside of active display area is not shown.

ZOOM

ZOOM

*: The product you purchased may not have this feature.

English

English-17

Downloaded From TV-Manual.com Manuals