NEC P401, P461, P521 user manual Alert Mail Setting, English-32

Alert Mail Setting

http://<the MonitorÕs IP address>/lanconfig.html

This option notifies your computer of an error message via e-mail when using wired LAN. An error message notification will be sent when an error occurs in the monitor.

HOST NAME	Type in the hostname of the network connected to the monitor.
	Up to 60 alphanumeric characters can be used.
DOMAIN NAME	Type in the domain name of the network connected to the monitor.
	Up to 60 alphanumeric characters can be used.
ALERT MAIL	Checking [ENABLE] will turn on the Alert Mail feature.
	Checking [DISABLE] will turn off the Alert Mail feature.
SENDERÕS ADDRESS	Type in the senders address. Up to 60 alphanumeric and symbols characters can be used.
SMTP SERVER NAME	Type in the SMTP server name to be connected to the monitor.
	Up to 60 alphanumeric characters can be used.
RECIPIENTÕS	Type in your recipientÕs address. Up to 60 alphanumeric and symbols characters can be used.
ADDRESS 1 to 3
APPLY	Click this button to reflect the above settings.
EXECUTE	Click this button to send a test mail to check if your settings are correct.
STATUS	A reply to a test mail will be displayed.

NOTE: ¥ If you execute a test, you may not receive an Alert mail.

Should this happen, check if the network settings are correct.

¥If you entered an incorrect address in a test, you may not receive an Alert mail. Should this happen, check if the RecipientÕs Address is correct.

TIP: The Alert Mail settings will not be affected even when [RESET] is done from the menu. For Control command diagram, please see file ÒExternal_Control.pdfÓ on the CD-ROM.

English-32

Downloaded From TV-Manual.com Manuals