Uniden UM380 owner manual Engine Noise Suppression

Page 39

Problem

Things to Try

I can’t see any words on the

Reset the radio back to the default brightness level:

turn off the radio; hold the CALL-MENU button and

display.

turn it back on.

Make sure your GPS receiver is correctly

connected (see Connecting to a GPS receiver,

I’m not getting any GPS data

page 31).

Make sure your GPS receiver is working properly.

on my display.

Make sure that your GPS receiver supports the

NMEA parameters described in NMEA Operation

on page 46.

Make sure Weather Alert Watch is turned on.

I’m not getting any hazard

Check to make sure the FIPS codes in your radio

alerts.

include your current location (see Using FIPS

codes for weather alerts on page 15).

Check to make sure the FIPS codes in your radio

were entered correctly (see Using FIPS codes for

I’m getting all the hazard

weather alerts on page 15).

Sometimes the Weather Alert Watch may catch

alerts, not just the ones for

a hazard alert in the middle of the broadcast and

my area.

miss which FIPS codes are affected. For your safe-

ty, the radio triggers the alert tone and switches to

the weather channel when this happens.

I can’t make Group DSC

Make sure the Group MMSI was entered correctly.

calls.

Where can I find my radio’s

Look on the right side of the radio (the side with the

serial number?

microphone cord), behind the mounting bracket.

The radio won’t let me enter

my User MMSI. What do I

Contact customer service.

do?

Engine Noise Suppression

Interference from the noise generated by the electrical systems of engines is sometimes a problem with radios. Your radio has been designed to be essentially impervious to ignition noise and alternator noise. However, in some installations it may be necessary to take measures to further reduce the effect of noise interference. Your radio’s DC battery wires, antenna lead, and accessory cables should be routed away from the engine and engine compartment, and from power cabling carrying high currents. In severe cases of noise interference, it may be necessary to install a noise suppression kit. Contact the dealer where you purchased the radio for more information.

English 35

UM380_20101221.indd 35

4/13/2011 11:25:18 AM

Image 39

Contents UM380 Making a Voice Distress Call Making a Distress CallFaire un appel de détresse vocal Faire un appel de détresseCómo hacer una llamada de socorro por voz Cómo hacer una llamada de socorroContents Conventions FeaturesIntroduction Manual overviewWhat’s included Getting StartedButton Press to Press and hold to Parts of the RadioTurning on the Radio Connector/Cable Connects to For details, seeCancel scanning and stay on Talk on a channel Channel Parts of the MicrophoneSetting the UIC Channel Mode USA/CAN/INT Mode What It Does Use It When To Turn it on./offHow It Works Normal mode operation Watch Mode What It Does Use It When To Turn it on./offMessage Meaning Monitoring Channel Using the radio in normal modeNormal mode with Weather Alert Watch Normal mode with Triple and Dual WatchScan mode Normal mode with both Weather Alert and Triple/Dual Watch08 10 11 12 13 15 17 Using the radio in scan mode Scan mode with Weather Alert WatchScan mode with Triple and Dual Watch Weather mode Scan mode with both Weather Alert and Triple/Dual WatchUsing the radio in weather mode Using Your Radio Using Your RadioMonitoring Weather Channel WX08 Changing the channel Setting the volumeSetting the squelch level Making a voice Mayday callChoosing Triple Watch or Dual Watch Boosting the transmission powerUsing Fips codes for weather alerts Contrast Setting the GPS position manuallyLamp adjust Changing display and sound optionsSetup What is an Mmsi number? Using Digital Selective Calling DSC FeaturesWhat is DSC? Advanced DSC featuresIndividual or User Mmsi Number Entering Mmsi numbersGroup Mmsi number Using the DirectoryCall type What it does When to use it Making DSC CallsChannel Up Button Channel Down Button Select Individual Calling a single station Individual CallMaking an automatic distress call Calling a particular group of stations Group CallCalling all stations All-Ships Call DSC Call Type Receive Log Information Canceling an automatic distress callReceiving a DSC call Receive logTest Calls Returning a callMaking Test Calls Test Enabling automatic test call reply Receiving Test CallsEnabling automatic position reply Position Request and ReplyRequesting another station’s position POS Request Receiving a position request Position ReplyDisabling automatic channel switching Putting the radio into standbySending your own position Position Send Mounting the radio Installing the HardwarePower Supply Requirements VHF Antenna Requirements Connecting the radioGround Wire Color Connecting to a GPS receiverGPS Verification Configuring the GPSConnecting to an External Speaker Connecting to a ChartplotterProblem Things to Try Maintenance and TroubleshootingEngine Noise Suppression Specifications Radio SpecificationsTransmitter Channel name/description Used for Reference TablesChannel descriptions and what they mean ReceiverCh No RX Freq TX Freq Status Name on display US Marine Channels and FrequenciesCanadian Marine Channels and Frequencies Ch No RX Freq TX Freq Status Name on display International Marine Channels and Frequencies Ch No RX Freq TX Freq Status Name on display Types of events Weather Channels and Frequencies US, CAN, and INTEmergency Alert System Same Information Ch No RX Freq Name on displayFFW WFW No Response Event CodeNmea Operation Nmea OutputNmea Input Three Year Limited Warranty English UM38020101221.indd 13/2011 112520 AM UM38020101221.indd 13/2011 112520 AM UM38020101221.indd 13/2011 112520 AM QUESTIONS?

Related manuals

Manual 53 pages 48.78 Kb