Uniden GPS105 quick start Navigation, 14.7km

Page 27

NAVIGATION

The navigation feature allows you to select a desired stored location point to navigate to. The location point can be a pre-installed state, city or suburb, quick access location, MY POI or CALLER from the caller list.

When navigating to a location point the navigation or NAVI Display alternates as follows:

5 Seconds Later

SUZAN

GPS N E

W S

DISTANCE

14.7km

5 Seconds Later

SUZAN

GPS N E

W S

TIME TO GO

16hr22min

If PTT is pressed the UHF-CB Display will appear. When transmission is complete the display will return to NAVI Display after 5 secs.

When approaching within 160m and 20m of the set destination the NAVI ARRIVE Tone will sound.

The compass heading (directional pointer) is referenced to the GPS105's last forward movement.

When viewing the compass heading the GPS105 must be facing in the direction of the last forward movement in order to read the compass heading correctly.

20

Image 27

Contents GPS105 Page Quick Start Installing Your GPS105Back Panel Connecting Your GPS105Searching for Test for a GPS SignalSetting User Name Send Position on Quick StartContents GPS Operation Speed Warning Early Warning Safety Alerts UHF-CB FeaturesIntroduction GPS FunctionsGPS105 ControlsUHF-CB Display IndicatorsGPS105 Manual Included with Your GPS105UHF CB Operation Setting the SquelchTo Transmit and Receive Selecting a ChannelOperation with the aid of a Repeater To Operate in Duplex Mode RepeatersScanning Scan Memory Reply DelayCtcss Continuous Tone Coded Squelch System Instant ChannelKEY Beep ON/OFF GPS Operation Press & hold Early Warning Safety AlertsCaller Display Operation Flow Mark LocationCamp MY POI LocationsEDIT/DELETE MY POI ADD or Delete Safety Alert 14.7km NavigationNavigate to Quick Access Navigate to MY POI Navigate to STATE/CITY 72h LCD Contrast MY PositionUHF CHANNELS& Frequencies Ctcss Tone ListTroubleshooting Uniden GPS105 UHF CB Radio with GPS WarrantyThank YOU