Uniden quick start Connecting Your GPS105, Back Panel

Page 4

2CONNECTING YOUR GPS105

EXTERNAL SPEAKER JACK

BACK PANEL

UHF ANTENNA CONNECTOR

GPS ANTENNA CONNECTOR

DC POWER CORD

Microphone Socket

i.Remove fuse from fuse holder along power lead.

ii.Connect 13.8V supply to the power lead making sure positive is applied to the red wire and ground to the black wire.

iii.Connect the UHF Antenna with PL259 fitting (not included).

iv.Connect the GPS Internal Antenna.

v.Make sure the Power Switch knob is OFF (see Controls page 4).

vi.Re-insert the fuse into the fuse holder.

vii.Connect microphone plug to microphone socket.

An optional External Speaker may be connected via the External Speaker Jack. When the external speaker is connected the internal speaker is automatically disconnected.

The connecting wire must use a 3.5mm miniature plug.

iii

Image 4

Contents GPS105 Page Installing Your GPS105 Quick StartConnecting Your GPS105 Back PanelTest for a GPS Signal Searching forSetting User Name Quick Start Send Position onContents GPS Operation Speed Warning Early Warning Safety Alerts Features IntroductionGPS Functions UHF-CBControls GPS105Indicators UHF-CB DisplayIncluded with Your GPS105 GPS105 ManualSetting the Squelch UHF CB OperationSelecting a Channel To Transmit and ReceiveTo Operate in Duplex Mode Repeaters Operation with the aid of a RepeaterReply Delay Scanning Scan MemoryInstant Channel Ctcss Continuous Tone Coded Squelch SystemKEY Beep ON/OFF GPS Operation Early Warning Safety Alerts Press & holdCaller Display Mark Location Operation FlowMY POI Locations CampEDIT/DELETE MY POI ADD or Delete Safety Alert Navigation 14.7kmNavigate to Quick Access Navigate to MY POI Navigate to STATE/CITY 72h MY Position LCD ContrastCtcss Tone List UHF CHANNELS& FrequenciesTroubleshooting Warranty Uniden GPS105 UHF CB Radio with GPSThank YOU