Uniden GPS105 quick start Troubleshooting

Page 34

TROUBLESHOOTING

If your GPS105 does not perform to your expectations, try the suggestions listed below.

Unit does not operate.

￿ Check the 2 Amp fuse in the power lead.

 

 

No GPS Detection.

￿ Make sure the GPS antenna has an

 

 

unobstructed view of the sky.

 

 

 

Cannot send or

￿

Make sure you are communicating with a

receive Caller ID.

 

compatible unit on channels 22 or 23.

 

￿ Check that SEND POSITION is set to ON

 

 

(Quick Start Guide step 5).

 

 

 

Does not operate in

￿

Make sure you select channels 1-8 for

Duplex mode.

 

Duplex operation.

 

￿

Check that you are within range of a local

 

 

repeater station.

 

 

 

27

Image 34
Contents GPS105 Page Installing Your GPS105 Quick StartConnecting Your GPS105 Back PanelTest for a GPS Signal Searching forSetting User Name Quick Start Send Position onContents GPS Operation Speed Warning Early Warning Safety Alerts GPS Functions FeaturesIntroduction UHF-CBControls GPS105Indicators UHF-CB DisplayIncluded with Your GPS105 GPS105 ManualSetting the Squelch UHF CB OperationSelecting a Channel To Transmit and ReceiveTo Operate in Duplex Mode Repeaters Operation with the aid of a RepeaterReply Delay Scanning Scan MemoryInstant Channel Ctcss Continuous Tone Coded Squelch SystemKEY Beep ON/OFF GPS Operation Early Warning Safety Alerts Press & holdCaller Display Mark Location Operation FlowMY POI Locations CampEDIT/DELETE MY POI ADD or Delete Safety Alert Navigation 14.7kmNavigate to Quick Access Navigate to MY POI Navigate to STATE/CITY 72h MY Position LCD ContrastCtcss Tone List UHF CHANNELS& FrequenciesTroubleshooting Warranty Uniden GPS105 UHF CB Radio with GPSThank YOU