Pioneer KEH-P6020RB operation manual Using PTY functions, Responding to the TP alarm

Section

04RDS

Notes

•You can also turn the TA function on or off by pressing FUNCTION.

•The system switches back to the original source following traffic announcement recep- tion.

•TA can be activated from sources other than the tuner if the tuner was last set to the FM band but not if it was last set to the MW/LW band.

•If the tuner was last set to FM, turning on TA lets you operate other tuning functions while listening to sources other than the tuner.

•Only TP and enhanced other network’s TP stations are tuned in during seek tuning or BSM when TA is on.

Responding to the TP alarm

When a TP or enhanced other network’s TP station is lost due to a weak signal the TP indi- cator is extinguished and a series of short beeps, about five seconds long, sound to remind you to select another TP or enhanced other network‘s TP station.

When listening to the tuner, tune in another TP or enhanced other network’s TP station.

•When listening to sources other than the tuner the unit will automatically seek out a TP station with the strongest signal after a 10- or

30-second delay. The delay is 10 seconds if TA is on and 30 seconds if TA and AF are on.

Using PTY functions

You can tune in a station by using PTY informa- tion.

Using news program interruption

When a news program is broadcast from a PTY code news station the unit can switch from any station to the news broadcast station. When the news program ends, reception of the previous program resumes.

Press TA and hold to turn on news program interruption.

Press TA until NEWS appears in the display.

•To turn off news program interruption, press TA and hold until NEWS disappears from the display.

Note

•You can also turn on or off news program interruption by pressing FUNCTION.

Receiving PTY alarm broadcasts

PTY alarm is a special PTY code for announce- ments regarding emergencies such as natural disasters. When the tuner receives the radio alarm code, ALARM appears on the display and the volume adjusts to the TA volume. When the station stops broadcasting the emergency announcement, the system returns to the previ- ous source.

•An emergency announcement can be can- celled by pressing TA.

16En