Fujitsu D2542 Features, Overview, Processors, Main memory, Chips on the system board

3 Features

3.1Overview

There are two versions of the system board D2542 with the part numbers S26361-D2542-A10 (SAS version) and S26361-D2542-B10 (SATA version). The two versions differ in the chipset and connectors assembling.

Processors

–One Intel® Xeon processor, Quad Core, Dual Core or Single Core or a Conroe-L Single processor with 800/1066/1333 MHz Front Side Bus, socket 775

–second level cache depending on the processor

Main memory

–Up to 4 slots for main memory DDR II 800 (PC2-6400) SDRAM unbuffered

–Maximum 16 Gbyte of memory

–Memory modules for 512 MB, 1 GB, 2 GB and 4 GB

–Supports dual-channel DDR2 interface with interleaved mode.

–Supports ECC (Error Correction Code)

Chips on the system board

–Intel® chipset:

–Bigby-P

–Southbridge: Intel® ICH9-R (SATA)

–Southbridge: Intel® ICH9 (SAS)

–SAS-Controller LSI 1064E (only SAS version).

–On optional riser card:

–2 x PCI express x8

–Super I/O SMSC 5027

–Dual Gigabit LAN controller: Broadcom 5715 C

–iRMC onboard Server Management and graphic controller

–BMC Kronos II iRMC

D2542 (RX100 S5) Technical Manual 13