Fujitsu D2542 technical manual Settings with jumpers, JP8 Boot Block, JP5 Password Skip

Page 26

Settings with jumpers

Features

3.8Settings with jumpers

The system board is supplied with all jumpers set on the following positions.

JP8

JP5

Figure 8: Jumper default settings

JP8 - Boot Block

1-2 Normal boot (default)

2-3 BIOS recovery

JP5 - Password Skip

1-2 Disable (default)

2-3 Enable

26

Technical Manual

D2542 (RX100 S5)

Image 26

Contents System Board D2542 for RX100 S5 Comments… Suggestions… Corrections… Certified documentation according to DIN EN ISOContents Page Introduction Notational conventionsPage Important notes Batteries ESD label CE Certificate CE CertificateEnvironmentally friendly product design and development Environmental ProtectionImportant notes Environmental Protection Returning, recycling and disposalProcessors FeaturesOverview Main memoryOverview External connectorsInternal connectors CSS Customer Self Service FeaturesBios features Form factorTPM Option Population of the memory Basic Main memoryModule population PCI slots PCI busPCI bus Screen resolution Temperature / system monitoringVoltage monitoring Temperature / system monitoringSensor monitoring System Event Log SELLEDs LEDsIndicator Meaning LEDInterfaces and connectors Schematic view of the system board D2542Interfaces and connectors External portsLAN connectors LAN connector LAN link/activity greenJP8 Boot Block Settings with jumpersSettings with jumpers JP5 Password SkipReplacing the lithium battery Replacing the lithium batteryPage Abbreviations Abkürzungen IRMC Nvram RAM WfM