Fujitsu D2542 Temperature / system monitoring, Sensor monitoring, Voltage monitoring

Page 20

Temperature / system monitoring

Features

Sensor monitoring

A fault in a temperature sensor is detected. Should this happen all fans monitored by this sensor run at maximum speed, to achieve the greatest possible protection of the hardware.

Voltage monitoring

When voltage exceeds warning level high an alert will be generated.

System Event Log (SEL)

All monitored events of the system board are recorded in the System Event Log.

20

Technical Manual

D2542 (RX100 S5)

Image 20

Contents System Board D2542 for RX100 S5 Comments… Suggestions… Corrections… Certified documentation according to DIN EN ISOContents Page Introduction Notational conventionsPage Important notes Batteries ESD label CE Certificate CE CertificateEnvironmentally friendly product design and development Environmental ProtectionImportant notes Environmental Protection Returning, recycling and disposalFeatures OverviewProcessors Main memoryOverview External connectorsInternal connectors Features Bios featuresCSS Customer Self Service Form factorTPM Option Population of the memory Basic Main memoryModule population PCI slots PCI busPCI bus Screen resolution Temperature / system monitoringTemperature / system monitoring Sensor monitoringVoltage monitoring System Event Log SELLEDs LEDsIndicator Meaning LEDInterfaces and connectors Schematic view of the system board D2542Interfaces and connectors External portsLAN connectors LAN connector LAN link/activity greenSettings with jumpers Settings with jumpersJP8 Boot Block JP5 Password SkipReplacing the lithium battery Replacing the lithium batteryPage Abbreviations Abkürzungen IRMC Nvram RAM WfM