Pioneer VSA-AX10Ai manual Surround Setup menu, Speaker Systems

Page 52

06The Surround Setup menu

•Speaker Systems – Specify the size and number of speakers you’ve connected (page 52).

•Channel Level – Adjust the overall balance of your speaker system (page 54).

•Speaker Distance – Specify the distance of your speakers from the listening position (page 55).

•Acoustic Cal EQ – Adjust overall equalization depending on your room characteristics (page 55).

•X-Curve– Adjust the amount of ‘re-equalization’ necessary to achieve a flat frequency response from your home theater system (page 59).

5Make the adjustments necessary for each setting, pressing ENTER to confirm after each screen. When you’re finished, you can check through your settings screen by screen by selecting Check from the Surround Setup menu (see Checking your surround settings on page 60 for more on this).

Speaker Systems

You need to specify the number of speakers you have in your system, and how you want to route the sound. It is a good idea to make sure that the settings made in Introduction to home theater on page 35 are correct.

1 Select ‘Speaker Systems’ then press ENTER.

2.Surround Setup

[ Check ]

[ 1.Speaker Systems ] [ 2.Channel Level ]

[ 3.Speaker Distance ] [ 4.Acoustic Cal EQ ] [ 5.X-Curve ]

[Return]

2Select how you want to set up your speakers then press ENTER.

2.1. Speaker Systems

[Manual Free]

[Manual THX]

(all small)

[Auto]

[Return]

•Manual Free – Manually set all speakers.

•Manual THX – All speakers are set to SMALL. You can only select the number of surround back speakers.

•Auto – All speakers are set automatically. (The microphone must be hooked up to the front panel to do this.)

3 Specify how your speakers are configured.

 

 

2.1.Speaker Systems

 

 

 

 

 

Manual Free

 

 

 

Speaker System Select

 

 

 

[

 

]

 

 

 

Normal Surround

 

 

 

 

SP_B:

 

 

 

 

[

Second Zone ]

 

 

 

[

Next]

 

 

 

 

 

 

 

Use

(cursor left/right) to cycle through the

following options:

 

 

 

•Normal Surround – Select for normal home theater use.

•Front Bi-Amp– Select this setting if you’re bi- amping your front speakers (see Bi-amping your front speakers on page 76).

•Bi-Surround– Select if you’re using two sets of surround speakers (see Adding a second set of surround speakers for Bi-Surroundon page 77).

If you selected Normal Surround, you’ll also have to select the speaker system B setting:

2.1.Speaker Systems Manual Free

Speaker System Select

[Normal Surround ]

SP_B:

[ Second Zone ]

[Next]

•Second Zone – Select if you want to hear speaker system B in a separate room.

•ITU-R– Select this setting to use two switchable main speaker systems using speaker system B (see Alternating surround speaker setups using speaker system B (ITU-R)on page 76).

•OFF – Select if no speakers are connected to the B terminals.

4Press ENTER to go to the next screen.

•If you selected Auto in step 2, you will have to select Next and then press ENTER to continue to the auto (test tone) setup.

Select Start and press ENTER to start the test tones when you’ve made sure the room is free of ambient noise. Go to step 8 when you see OK appear on the OSD.

52

En

Page 51 Page 53
Image 52
Page 51 Page 53
Contents VSA-AX10Ai Operating Environment Risk of Electric Shock Do not OpenPage Contents Using other functions Advanced setupOther connections Additional informationFeatures Our philosophyChecking the supplied accessories Using the remote controlBefore you start Before you start ChapterSetting up the remote control Calibrating the remote control screenBefore you start Press CalibrateSetting the button alert volume Setting the clockSetting the time-out setting Resetting the remote control Locking the remote controlRestarting the remote control Press Reset to DefaultReplacing the lithium-ion batteries Connecting your equipment Chapter Connecting your equipmentRear panel Connecting your equipment When making cable connectionsConnecting your equipment Connecting your TV Connecting your equipment Connecting a DVD player DVD playerConnecting the multichannel analog outputs STB Connecting your equipment Connecting a VCR or DVD recorder VSA-AX10AiConnecting your equipment Connecting other video sources Connecting your equipment Using the component video jacks About the video converterConnecting your equipment Connecting digital audio sources Connecting your equipment Connecting analog audio sources Portable DVD player, etc Connecting your equipment Installing your speaker system Connecting the speakersBare wire connections Placing the speakersConnecting your equipment Plugging in the amplifier About the AC outletControls and displays Chapter Controls and displaysDisplay Controls and displays Tone Basic remote control displays Controls and displays Remote controlHome menu screens Amplifier menu screens SetupDigital NR Remote control displays for other components TV control menu screensOperating menus for additional components Search Mode AudioSubtitle TOP MenuAutomatically setting up for surround sound Switch on the amplifier and your TVGetting started Getting started ChapterGetting started EnterOther problems when using the Auto Surround Setup Checking the settings on your DVD or other playerPlaying a source Change the amplifier input to the source you want to play Listening to your system Listening to your system ChapterAbout the listening modes Listening in surround soundNeo6 Music settings Dolby Pro Logic IIx Music settingsListening to your system Using the Advanced surround effects Using the Home THX modesAdjusting the Advanced Surround effect level Use the Option +/- buttons to adjust the effect levelListening with headphones Listening in stereoPro Logic IIx Movie PRO Logic NEO6 CinemaUsing the Stream Direct mode Press Multi CH Input on the remote control Home menu screenSelecting the input signal type AnalogSelecting USB and multichannel analog input channels Listening to high-sampling formatsChannel Listening to your system Using the surround back channel Press SB CH Mode repeatedly to cycle throughAuto Surround back channel optionsCreating a center speaker effect Use the Option +/- buttons to change the settingVSB Auto VSB on VSB OFF Listening to your system Using Hi-bit and Hi-sampling Using Midnight and Loudness listeningUsing the tone control Switching the tone control on or offReducing noise during playback Adjusting the bass and trebleTreble Listening to your system Listening to dual mono soundtracks Surround Setup menu Surround Setup menu ChapterMaking amplifier settings from the Surround Setup menu Select ‘Surround Setup’ then press EnterSurround Setup menu Speaker SystemsLarge Channel Level Select ‘Channel Level’ then press EnterSetting the Acoustic Calibration EQ automatically Setting the Acoustic Calibration EQ manuallySpeaker Distance Acoustic Calibration EQCopying your Acoustic Calibration EQ settings Select ‘Manual’ then press EnterSelect CUSTOM1 or CUSTOM2 then press Enter Select ‘Data Copy’ then press EnterHow to interpret the graphical output How to use Professional Acoustic Calibration EQProfessional Acoustic Calibration EQ Using Professional Acoustic Calibration EQ Select a manual setup option and press EnterSelect ‘Professional’ then press Enter If you selected ‘Auto Pro.’, select ‘Start’ and pressSwitch the X-Curve on or OFF CurveUse Cursor left/right buttons to select Select ‘X-Curve’ then press EnterSelect ‘Check’ from the Surround Setup menu and press Enter Checking your surround settingsCycle through the settings screen by screen Using the remote control with other components Recalling preset codesControlling other equipment Controlling other equipment ChapterSelect a setting type Controlling other equipmentPress Learning on the remote setup menu Programming signals from other remote controlsPioneer-1 DVR-7000 Editing remote control button names Press Direct Function on the remote setup menuPress OK to confirm the settings Press KEY Label on the remote setup menuSelect the button you want to rename Press OK when you’ve finishedChoose how you want to change the look of the button Controlling other equipment Multi Operation and System Off Programming a multi operation or a shutdown sequenceUsing multi operations Press OK when you’re finishedFrom the remote control Home menu press Multi OperationSwitching components on and off Using the 12 volt triggerUsing System off System OFFUsing other functions Using other functions ChapterMaking an audio or a video recording Monitoring your recordingUse the Option +/- buttons to adjust the amount of delay Adjusting the delay of a soundtrackWatching video and audio sources independently Switch the SD1 Normal Stream Direct mode Using other functionsEnhancing Sacd playback Using other functions Dimming the display Switching the speaker impedanceResetting the system Using other functions Checking your system settingsDefault amplifier settings Bypass Using speaker system B Switching the speaker systemUsing speaker system B in another room Other connectionsSelect the ‘ITU-R’ setting from the Speaker Systems menu Other connectionsBi-amping your front speakers SP B ITU-R is selectedUsing the pre-outs Bi-wiring your speakersConnecting additional amplifiers Using the i.LINK interface Connecting an external stereo pre-amplifierAbout Pqls rate control About i.LINKCreating an i.LINK network Using the USB interface Press ‘USB’ on the remote control Home menu ScreenConnecting a PC for Advanced Mcacc output Advanced Mcacc output using your PC Select ‘PC Output’ and press EnterAdvanced setup Advanced setup ChapterInput Assign menu Assigning the digital inputsAssigning the component video inputs Advanced setupAssigning the i.LINK inputs Expert Setup menu Select ‘Expert Setup’ then press EnterAssigning the video inputs Multi in OFF USB OFFOSD Adjustment Bass Peak LevelDynamic Range Control Function RenameOSD Overlay Edit the name as necessary and press EnterSelect ‘THX Audio Setup’ then press Enter THX Audio SetupVolt Trigger THX Ultra2 Subwoofer Setup Surround Back Speaker PositionOptimizing your speaker setup Basic surround setupAdditional information Additional information ChapterTHX speaker system setup Additional informationPower Additional information TroubleshootingNo sound Listening in surround sound on Other audio problems Cause RemedyVideo Audio sources onSettings Remote controlDisplay This unit’s sensor onLink interface Link messagesUSB interface MiscellaneousAdditional information Surround sound formats DolbyWindows Media Audio 9 Professional About THXPCM Pulse Code Modulation Maintenance of external surfaces THX Ultra2 Cinema modeAdvanced Speaker Array ASA THX MusicModeAdditional information Specifications 04B00001 ARB7291-A

VSA-AX10Ai specifications

The Pioneer VSA-AX10Ai is a high-end, multi-channel home theater receiver that stands out for its robust performance and cutting-edge technologies. Launched as a flagship model, it combines advanced audio processing capabilities with a formidable power output, catering to both audiophiles and home theater enthusiasts.

One of the standout features of the VSA-AX10Ai is its Direct Energy HD Amplification technology, which incorporates a Class D amplifier design. This technology not only ensures high power efficiency but also minimizes distortion, delivering pristine sound quality at high volumes. The receiver boasts a substantial output of 200 watts per channel over eight channels, making it an ideal choice for driving large, demanding speaker systems.

In terms of audio decoding, the VSA-AX10Ai supports a multitude of formats, including Dolby TrueHD and DTS-HD Master Audio. This feature allows the receiver to provide a cinematic surround sound experience, ensuring that every detail of the soundtrack is delivered with accuracy and clarity. The device is also equipped with a high-quality 24-bit/192 kHz DAC, assuring top-notch sound reproduction from a variety of sources.

The VSA-AX10Ai features Pioneer’s sophisticated MCACC (Multi-Channel Acoustic Calibration System), which automatically calibrates the audio output to match the room's acoustics. By measuring sound from each speaker and adjusting levels, delays, and equalization, it ensures a balanced sound field, regardless of room shape or speaker placement.

Connectivity is extensive, with multiple HDMI inputs offering 4K pass-through and upscaling capabilities. This makes the receiver well-suited for modern home theater setups that require integration with 4K Ultra HD displays. It also includes legacy inputs, ensuring compatibility with older audio and video equipment.

Another noteworthy characteristic is the receiver’s build quality. The VSA-AX10Ai features a rigid chassis designed to minimize vibration as well as a premium-grade power supply, which contributes to its overall reliability and performance.

Overall, the Pioneer VSA-AX10Ai encapsulates the essence of high-fidelity home audio and video. With its extensive feature set, exceptional sound quality, and robust performance capabilities, it remains a top choice for those seeking a comprehensive and immersive home theater experience. Whether for music playback or movie watching, this receiver delivers an unparalleled audio experience that stands the test of time.
Top Page Image Contents