∙Frequency: 433 MHz
∙Update Rate: 48 seconds
6.2 Measurement Specifications
The following table provides specifications for the measured parameters.
Measurement | Range | Accuracy | Resolution |
Indoor Temperature | 32 to 140 °F | ± 2 °F | 0.1 °F |
Outdoor Temperature | ± 2 °F | 0.1 °F | |
Outdoor Humidity | 20 to 95% | ± 5% | 1 % |
6.3 Power Consumption
∙Base station : 2 x AA 1.5V Alkaline batteries
∙Remote sensor : 2 x AAA 1.5V Alkaline batteries
∙Battery life: Minimum 24 months for base station
Minimum 24 months for
7. Troubleshooting Guide
If your question is not answered here, you can contact us as follows:
1.Email Support: support@ambientweather.com
2.Live Chat Support: www.ambientweather.com/chat.html
3.Technical Support:
Problem |
| Solution |
|
Wireless remote | The maximum line of sight communication range is | ||
reporting in to console. |
| 300’. Move the sensor assembly closer to the display | |
|
| console. |
|
There are dashes on the display console. |
|
| |
|
| If the sensor assembly is too close (less than 10’), move | |
|
| the sensor assembly away from the display console. | |
|
| Cycle power on the console. The console may have | |
|
| exited the search mode. |
|
|
| Install a fresh set of batteries in the remote |
|
|
| ||
|
| install lithium batteries. |
|
|
| Make sure the remote sensors are not transmitting | |
|
| through solid metal (acts as an RF shield), or earth | |
|
| barrier (down a hill). |
|
|
| Move the display console around electrical noise | |
|
| generating devices, such as computers, TVs and other | |
|
| wireless transmitters or receivers. |
|
|
|
|
|
Version 1.0 | ©Copyright 2010, Ambient LLC. All Rights Reserved. | Page 6 | |