4.5 Installation of the antenna/electromagnetic exposure
For optimal radio settings and minimal user exposure to electromagnetic radio frequency energy, ensure that:
∙The antenna is connected to the transceiver and is properly installed.
∙The antenna is situated away from people and is positioned at least three feet from the transceiver and microphone.
∙The connector is a standard PL259 (male UHF).
4.6 Mounting of Microphone
To install the microphone mount, look first for a mounting point close to the transceiver. The distance between the transceiver and the wall mount must be less than the length of the microphone cable.
IDo not pull excessively on the microphone cord. This part is important to the correct operation of the radio: over time, pulling may damage the cord and impede the user from transmitting.
Page 12