Midland Radio RG2W, RG2B manual Listing L. Sinking M. Adrift

Page 21

I.LISTING L. SINKING M. ADRIFT

4.To send out the distress call hold down the DISTRESS-button for 5 seconds. An acoustic alert will emit and the distress call will be carried out on channel 70 even when the channel is in use.

5.After the distress call, the transceiver will simultaneously check channel 70 and channel 16 on a receipt of DSC confirmation and meanwhile appears following:

6.At this point:

If the distress call is received and confirmed by another DSC radio station, the acoustic alarm will stop sounding and the display will return to

normal use in VHF mode on channel 16, sending

T

on high transmission power.

 

If no confirmation is received, the device will re-send the distress call at intermissions of 3.5 – 4.5 minutes (even with channel 70 in use), until a confirmation is received or until the user manually cancels the call through the C- button.

IBy pressing button 16, the transceiver will return to normal VHF operation, but the call will not be cancelled and the person who responded to the call may not have called off rescue operations.

2If, at step 4, the user stops pressing the DISTRESS button before 5 seconds have elapsed, the distress call will not be sent. To exit and return to VHF mode, press button

16.

2

2

The acoustic alarm will only stop definitively once the transceiver has received confirmation from the receiver of the call.

It is possible to arrest the acoustic alarm by pressing the button C or 16.

Page 21

Image 21
Contents Regatta Table of Contents Maintenance Above ALL... Safety Symbols usedRegistration of your Marine Transceiver Assistance Manual NotesSerial number Introduction Front panel Description of Controls and ConnectorsBack panel connections Microphone PTT push to talkMicrophone Installation Contents of packageLocation for the transceiver Mounting the transceiver Adjustment of angleMounting of Microphone Installation of the antenna/electromagnetic exposureMale Regatta connector view Antenna Power SupplyConnections GPS deviceBasic Operation Volume regulationTurning Regatta 2 on/off Squelch RegulationSelecting high and low transmission power Instant recall of channelDisplay lighting Channel scanning Scanning FunctionsDual Watch and Triple Watch Activation of Dual Watch/TripleMemory scanning Scan Memory Memory channels MEM modeReception/Transmission during Scan Memory To delete/To jump a pre-selected channel in memory Digital Selective Calling DSC USE with GPSGroup calling Group Call Sending an individual callSending a group call DSC Distress call General call to all ships ALL Ship Safety ALL Ship UrgencySending a call to all ships Sending a Distress callListing L. Sinking M. Adrift Receiving a distress call General call to all shipsIndividual call Customization LCD display contrast Beep Enable/disable keypad beepZONEAdjustment of UTC time deviation MaintenanceMmsi Setting of personal Mmsi code and Mmsi group code Maintenance and warningsTroubleshooting Technical Specifications TransmitterReceiver 160.700 160.650160.750 160.800INT Can