LCD display contrast | Midland Radio RG2B, RG2W guide

2 Select with the function keys “Next “ or “Back” the address you desire to modify/cancel.

3 Press the function key “Edit”.

4If you desire to change the name or the code, press one of the 2 function keys associated to the name or the MMSI code “? ”.

6.b.5 If it is desired to eliminate completely the
directory, press the function key	“Del” and
confirm by pressing subsequently	the function

	key “Yes”.	W
	If you desire to cancel the operation, press the function key “NO”.	W

2It is possible to memorize max. 16 addresses. If the directory is filled up, on the display will appear the indication “Full” and it will not be possible to add further addresses. In this case it is necessary to cancel some.

10.6 “Posn”(Setting of position co-ordinates and adjustment of UTC time)

1.Press the function key “DSC”.

2.Press the key “Menu”.

3.Press the key “Posn”.

4.To insert the coordinates, press the function key “Posn” and through the alphanumeric keypad, set up the coordinates.

5.Confirm by pressing the E-button. If “non-existent” coordinates have been inserted, REGATTA 2 will emit a double error beep rendering necessary the re-insertion.

6.In order to set the time, press the function key corresponding to “UTC”, and confirm through the E-button the executed operation. An eventual error message will indicate the wrong entry of time data.

2The insertion of time coordinates is required to carry out DSC calls. If REGATTA 2 is connected to a compatible GPS receiver (GPS 200) the setting of these data is not

compulsory. Sending DSC without setting position and time works but message will lack the position and time data.

10.7 ”LCD” (display contrast)

The user can adjust the display contract to optimise visibility according to ambient conditions.

1.Press the function key “DSC”.

2.Press the function key “Menu”.

3.Press the function key “LCD”.

4.Using the function keys corresponding to “? ” ; “? ” you can increase the contrast of the display.

5.Confirm by using one of the following buttons: C , 16, function key DSC, or the PTT.

2This setting remains stored on the Eeprom, therefore REGATTA 2 will maintain the same settings when the radio is turned on again.

10.8 “Beep” (Enable/disable keypad beep)

In order to activate or to inhibit the beep to the pressure of the keys operate as follows:

1.Press the function key “DSC”.

2.Press the function key “Menu”.

3.Press the function key “More”.

4.Press the function key “ More”.

5.Pressing the function key “Beep” activates or disables the acoustic message to the pressure of the keys.

2This setting remains stored on the Eeprom, therefore REGATTA 2 will maintain the same settings when the radio is turned on again.

Page 24