Customization | Midland Radio RG2W, RG2B specs

10 CUSTOMIZATION

10.1 Menu settings

REGATTA 2 can carry out a series of settings in order to personalize the transceiver to your requirements and to insert the necessary data to its operation.

10.2 Navigation in the menu of settings

To access the menu of setting use the functions keys.

All programmed settings are stored in non-volatile memory.

10.3 List of settings

Following find the possible settings:

Menu Items	Description	Par.
Log	Call directory of stored DSC calls type individual or	10.4
	distress calls.
Dir	Directory of MMSI owner names, MMSI codes and	10.5
	their details.
Posn	Manual programming of co-ordinates and the UTC	10.6
	time setting (in the absence of GPS).
LCD	Display contrast adjustment.	10.7
Beep	Adjustment of keypad beep	10.8
ZONE	Local and UTC time deviation settings.	10.9
MMSI	Entry of your individual MMSI code and you MMSI	10.10
	group code.

10.4“ Log” (list of registered calls)

With this menu you can consult a directory of the latest registered calls, in analogous way to the registrers of calls on a cellular phone.

-Press the function key “DSC”.

-Press the buttons “DSC” and “Log”. It will be shown the latest registered message.

-By pressing the function key corresponding to “Back” all the other registered messages will be shown.

-Using the function keys corresponding to the symbol “? ” you will get some more information: co-ordinates and time.

10.5 “Dir” (Entries in the directory)

You can insert into the directory the MMSI codes from frequently called stations, by giving them a name (e.g. vessel or owner). Then you can search and use them more comfortably. When receiving a call, MMSI owner name and MMSI code will be displayed.

1.Press the function key “Menu”.

2.Press the function key “More”.

3.Press the function key “Dir”.

4.At this point you enter to the directory pages. If no MMSI owner address was stored, the display will show “Empty”, throughout it has been stored one or two MMSI

owner addresses, the type of indication will appear as
follows:	U

5.By pressing the function key “Add” you will have the possibility to add further MMSI addresses. Pressing the function key “VIEW” you will have the possibility to modify/cancel the address shown on the display.

10.5.a	Addition of addresses
6.a.1 Press the function key “Add”.
6.a.2 With the alphanumerical keypad		(the keys
are associated with letters like on a cellular phone)			V
you are	able to write the name you	want to

associate with the MMSI code (f.e. TOM), then press the E-button to confirm.

6.a.3 After the pressure to the E-button, on the display appears the cursor in correspondence to “MMSI”

Write the identification code using the alphanumerical keypad (obligatorily 9 digits)

6.a.4 Press the E-button in order to confirm.

10.5.b To modify/cancel addresses

1 Press the function key “View”.

Page 23