Kramer Electronics user manual Overview, Your VP-100A XGA / Audio Interface

Overview

3 Overview

The VP-100Ais a high performance XGA and audio interface that accepts a computer graphics (XGA) signal on an HD15 connector and outputs it to RGBHV1 on BNC connectors, and also converts an unbalanced stereo audio signal to balanced stereo audio.

In addition, the VP-100Aincludes:

￿￿A video bandwidth of 430MHz, to ensure transparent operation at multiple resolutions including UXGA

￿￿A local monitor loop-through on an active HD15F connector

￿￿An unbalanced stereo audio input on a 3.5mm mini jack

￿￿A balanced stereo audio output on a terminal block connector

￿￿Hs and Vs shift control

￿￿Cable equalization control

￿￿Left and right audio level controls

￿￿ID Bit control switches

To achieve the best performance:

￿￿Connect only good quality connection cables, thus avoiding interference, deterioration in signal quality due to poor matching, and elevated noise- levels (often associated with low quality cables)

￿￿Avoid interference from neighboring electrical appliances and position your Kramer VP-100Aaway from moisture, excessive sunlight and dust

4 Your VP-100A XGA / Audio Interface

Figure 1, Table 1 and Table 2 define the VP-100Afront and rear panels:

1 Separate H and V (RGBHsVs) or RGBCs (separate composite sync)

2 KRAMER: SIMPLE CREATIVE TECHNOLOGY