Grundig WR 5408 PLL manual Setting the alarm time, Deleting preset stations

Page 12

SETTINGS___________________________________________________

Deleting preset stations

1Enter the preset station using the numerical buttons » 1 … 9«.

–Display: the frequency and the preset number, for example » «.

2Press »MEMO AM/PM«.

–Display: The selected preset station flashes.

3Press »C M. DEL«.

–The selected preset station is deleted.

Setting the alarm time

The alarm time is always set in the time shown on the display. You can set the alarm as a signal tone, a radio station, or both.

1Press »ALARM « (signal tone) or »ALARM « (radio station) with the device switched off.

– Display: the alarm time most recently set, » « or » « flash.

Note:

If the radio is switched off, press »DISPLAY« to switch the display to the clock, and start at step 1.

2Enter the alarm time using the numerical buttons » 1 … 0«.

3Press » FREQ./CLOCK« to confirm the entry.

–Display: the alarm time you entered, » « or » « stay lit.

–The device switches on at the set time with the signal tone or the radio station most recently selected.

30

Image 12

Contents World Receiver Page Safety SAFETY, InformationEnvironmental note Scope of deliveryControls FrontRight side of device Left side of deviceTop of device Bottom of deviceBack of device 00,0.00 DisplayBattery operation Power SupplyMains operation with standard 6 V/200 mA mains adapter Environmental noteSetting the clock Setting local timePress » FREQ./CLOCK« Setting and storing radio stations Tuning radio stations directlyTuning radio stations manually Saving radio stations on preset positionsSettings Press »MEMO AM/PM« Storing short wave SW stationsAutomatic station search Setting the alarm time Deleting preset stationsSwitching on and off Radio operationSpecial features of SW reception Connecting the external SW antenna SSB reception for example for radio hams and shippingAlarm mode Sleep timer mode Setting the sleep timerDeactivating the sleep timer Additional functionsSetting various function modes Switching on the back lighting for the displayDisabling and enabling the buttons Code FunctionDisabling and enabling the fine tuning dial Deleting all settingsTechnical data Information