Grundig WR 5408 PLL manual Setting various function modes, Disabling and enabling the buttons

Page 18

OPERATION _______________________________________________

Setting various function modes

Using the »MODE« button and a two-digit code, which you enter using the numerical keys »0 ... 9«, you can change various functions:

	Code	Function	Code	Function

MODE	10	FM frequency change	11	FM frequency change
		in 100 kHz steps		in 200 kHz steps

MODE	20	MW frequency change	21	MW frequency chan-
		in 9 kHz steps		ge in 10 kHz steps

MODE	30	Time display in 12	31	Time display in 24
		hour format		hour format

MODE	40	Signal tone off	41	Signal tone on

MODE	50	Arrange stations in	51	Arrange stations in
		sequence from low to		sequence from low to
		high frequency range		high frequency range

This is how to change the various function modes:

1Press »MODE«.

– Display: »( )« flashes.

2Enter the code, for example »40«, using »0 ... 9«.

–Display: »( 40 )« flashes.

3Press » FREQ./CLOCK« to confirm.

–Display: briefly »OFF«, then the time or frequency.

–The signal tone is deactivated.

Switching on the back lighting for the display

1Press »LIGHT« to switch on the display lighting for 7 seconds.

2Press »LIGHT« to switch off the display lighting.

Disabling and enabling the buttons

1To disable the buttons, move »LOCK« to the »•« position.

–Display: » «.

2To enable the buttons, move »LOCK« to the opposite position.

–Display: » « disappears from the display.

36

Image 18

Contents World Receiver Page Environmental note SafetySAFETY, Information Scope of deliveryControls FrontRight side of device Left side of deviceTop of device Bottom of deviceBack of device 00,0.00 DisplayMains operation with standard 6 V/200 mA mains adapter Battery operationPower Supply Environmental noteSetting the clock Setting local timePress » FREQ./CLOCK« Tuning radio stations manually Setting and storing radio stationsTuning radio stations directly Saving radio stations on preset positionsSettings Press »MEMO AM/PM« Storing short wave SW stationsAutomatic station search Setting the alarm time Deleting preset stationsSwitching on and off Radio operationSpecial features of SW reception Connecting the external SW antenna SSB reception for example for radio hams and shippingAlarm mode Deactivating the sleep timer Sleep timer modeSetting the sleep timer Additional functionsDisabling and enabling the buttons Setting various function modesSwitching on the back lighting for the display Code FunctionDisabling and enabling the fine tuning dial Deleting all settingsTechnical data Information