West Marine VHF580 manual Boosting the transmission power, Choosing Triple Watch or Dual Watch

Page 18

Boosting the transmission power

In most situations, the 1 Watt transmission power is all you need. If you find yourself far away from other stations and have trouble getting a response, you may need to boost the transmission power from 1 Watt to 25 Watts:

1.Select the channel you want to transmit on.

2.Push and hold ENT-1W/25Wfor two seconds. The display shows 25 Watts in the upper left hand corner.

3.The transmit power remains at 25 Watts until you change the setting back. Push and hold ENT-1W/25Wfor two seconds. The display shows 1 Watt.

##NOTE: Don’t forget to change the transmission setting back to 1 Watt when you move closer to other stations.

##NOTE: By default, when you change to channel 16, the radio automatically boosts the power to 25 Watts. Be sure to change the power back to 1 Watt if you are not making an emergency transmission.

Some channels (for example, channels 13 and 67) limit the power of transmission to 1 Watt so that there is less interference between boaters attempting to use the channel at the same time. If you switch to one of these channels, the radio changes back to 1 Watt automatically. See the channel lists beginning on page 41 for a list of power-restricted channels.

Choosing Triple Watch or Dual Watch

In Triple Watch mode, the radio briefly checks channels 16 and 9 every two seconds. In Dual Watch mode, the radio checks channel 16 only. Generally, Triple Watch is used in areas where channel 9 is used as a hailing frequency while Dual Watch is used in areas where channel 16 is used for distress and hailing. Your radio comes set to use Triple Watch; if you want to use Dual Watch instead, you will have to select it in the setup:

Press and hold -

Setup

Dual/TriWatch

Dual/TriWatch

88A

Dual Watch

Triple Watch [Exit]

Back[CLR] Select[ENT]

1.Press and hold CALL MENU to display the normal menu.

2.Select Setup and then Dual/Tri Watch.

3.Choose Dual Watch and press ENT-1W/25W. The radio activates the new setting and returns to the Setup menu.

4.To reactive Triple Watch, repeat the procedure described above, but choose Triple Watch in step 3.

18

Image 18
Contents DSC Marine Radio Making a Distress Call Making a Voice Distress CallFaire un appel de détresse Faire un appel de détresse vocalCómo hacer una llamada de apuro Cómo hacer una llamada de apuro por vozContents Manual overview FeaturesIntroduction ConventionsGetting Started What’s includedParts of the Radio Button Press to Press and hold toConnector/Cable Connects to For details, see Parts of the MicrophoneButton Press to Press and hold How It Works Setting the UIC Channel Mode USA/CAN/INTMode What It Does Use It When To Turn it on./off Turning on the RadioNormal mode operation Watch Mode What It Does Use It When To Turn it on./offNormal mode with Triple and Dual Watch Using the radio in normal modeNormal mode with Weather Alert Watch Message MeaningScan mode Normal mode with both Weather Alert and Triple/Dual Watch08 10 11 12 13 15 17 Scan mode with Triple and Dual Watch Using the radio in scan modeScan mode with Weather Alert Watch Scan mode with both Weather Alert and Triple/Dual WatchWeather mode Using the radio in weather modeWeather mode with Weather Alert Watch Using Your Radio Using Your RadioMaking a voice Mayday call Setting the volumeSetting the squelch level Changing the channelBoosting the transmission power Choosing Triple Watch or Dual WatchUsing Fips codes for weather alerts Changing display and sound options Setting the GPS position manuallyLamp adjust ContrastAdvanced DSC features Using Digital Selective Calling DSC FeaturesWhat is DSC? What is an Mmsi number?Entering Mmsi numbers Individual or User Mmsi NumberUsing the Directory Group Mmsi numberCall type What it does When to use it Making DSC CallsChannel Up Button Channel Down Button Calling a single station Individual Call Select IndividualMaking an automatic distress call Calling a particular group of stations Group CallCalling all stations All-Ships Call Receive log Canceling an automatic distress callReceiving a DSC call DSC Call Type Receive Log InformationTest Calls Returning a callMaking Test Calls Test Enabling automatic test call reply Position Request and ReplyReceiving Test Calls Requesting another station’s position POS RequestReceiving a position request Position Reply Enabling automatic position replySending your own position Position Send Disabling automatic channel switching Putting the radio into standbyRenaming Channels ENT-1W/25W Installing the Hardware Mounting the radioConnecting the radio Power Supply Requirements VHF Antenna RequirementsConnecting to a GPS receiver Ground Wire ColorConfiguring the GPS GPS Data ExternalConnecting to a Chartplotter Connecting to an External SpeakerMaintenance and Troubleshooting Problem Things to TryEngine Noise Suppression Specifications Radio SpecificationsTransmitter Receiver Reference TablesChannel descriptions and what they mean Channel name/description Used forUS Marine Channels and Frequencies Ch No RX Freq TX Freq Status Name on displayCanadian Marine Channels and Frequencies Ch No RX Freq TX Freq Status Name on display International Marine Channels and Frequencies Ch No RX Freq TX Freq Status Name on display Ch No RX Freq Name on display Weather Channels and Frequencies US, CAN, and INTEmergency Alert System Same Information Types of eventsFFW No Response Event Code WFWNmea Operation Nmea OutputNmea Input Basic radio guidelines Three Year Limited Warranty Page QUESTIONS?