Icom IC-F3061T, IC-F3062S, IC-F3062T, IC-F3061S, IC-F3063S, IC-F3063T Receive Adjustment, Convenient

6-4 RECEIVE ADJUSTMENT

Select an adjustment item using [↑] / [↓] keys, then set to the specified value using [←] / [→] keys on the connected PC's keyboard.

ADJUSTMENT

ADJUSTMENT CONDITION

MEASUREMENT

UNIT LOCATION

VALUE

RECEIVE		NOTE: "RECEIVE SENSITIVITY" must be adjusted before "S-METER." Otherwise, "S-METER" will not be
SENSITIVITY			adjusted properly.
[BPF T1 C]
		1	• Channel	: CH 5	Multi	Connect the SINAD meter	Minimum distortion
[BPF T2 C]
			• Connect the SSG to the antenna connec-		connec-	with an 8 Ω load to the JIG	level
			tor and set as;		tor	cable.
			Frequency	: 155.000 MHz
			Level	: +20 dBµ† (–87 dBm)
			Modulation	: 1 kHz
			Deviation	: ±3.5 kHz
			• Receiving
[BPF T1	H]	2	• Channel	: CH 6
[BPF T2	H]		Frequency	: 136.000 MHz
			• Receiving
[BPF T1	L]	3	• Channel	: CH 7
[BPF T2	L]		Frequency	: 174.000 MHz
			• Receiving

		CONVENIENT:
		The "RECEIVE SENSITIVITY" can be adjustment automatically.
		1: Put the cursor on "BPF T1 C/L/H ALL" or "BPF T2 C/L/H ALL" and then push [ENTER] key.
		2: The connected PC tunes BPF's to peak levels automaticaly.
			or
		1: Put the cursor on the one of "BPF T1 C/L/H" and "BPF T2 C/L/H" as desired.
		2: Push [ENTER] key to start tuning.
		3: Repeat 1 and 2 to perform additional BPF tuning.
S-METER	1	• Channel	: CH 6	Push the [ENTER] key on the connected PC's keyboard to set
[RSSI]		• Connect the SSG to the antenna connec-		"S3" level.
		tor and set as;
		Frequency	: 136.000 MHz
		Level	: +23 dBµ† (–84 dBm)
		Modulation	: 1 kHz
		Deviation	: ±3.5 kHz
		• Receiving
	2	• Set the SSG as;	: –7dBµ†(–114 dBm)	Push the [ENTER] key on the connected PC's keyboard to set
		Level		"S1" level.
		• Receiving
SQUELCH	1	• Channel	: CH 5	External	Connect an 8 Ω speaker to	Set the [SQL] to the
[SQL]		• Close the squelch by adjusting the value of		speaker	the JIG cable.	value that the audio
		[SQL] item on the CS-F3060 ADJ's screen.				signals just appears.
		• Connect the SSG to the antenna connec-
		tor and set as;
		Frequency	: 155.000 MHz
		Level	: –14 dBµ† (–121 dBm)
		Modulation	: 1 kHz
		Deviation	: ±3.5 kHz
		• Receiving

†; The output level of the standard signal generator (SSG) is indicated as the SSG's open circuit.

6 - 6