SECTION 3 DISASSEMBLY INSTRUCTIONS
• REMOVING THE CHASSIS UNIT
1Unscrew 1 nut A, and remove 2 knobs B and C.
2 Unscrew 2 screws D.
3 Take off the chassis unit in the direction of the arrow. 4 Disconnect the flat cable E form J501.
5 Remove the seal F.
6 Unscrew 2 nuts G and remove the plate H.
Chassis unit | F | D |
| ||
|
|
G
H
A
B
C 
•REMOVING THE RF UNIT
1 Unsolder 3 points A.
2Unscrew 4 screws B and remove the RF unit from the chassis.
B
RF unit
A
A
J501
E
•REMOVING THE MAIN UNIT
1 Unsolder 1 point A.
2 Unscrew 1 screw B and remove the VR unit.
3 Unsolder 5 points C and remove the shield plate D. 4 Unsolder 10 points E.
5Unscrew 7 screws F and remove the MAIN unit from the chassis.
• REMOVING THE FRONT UNIT
1Disconnect the flat cable A from J503.
2 Unsolder 2 points B.
3Unscrew 6 screws C and remove the plate D and FRONT unit.
B | B | |
A | ||
VR unit | ||
| C 5 | |
A | C | |
| C | |
D | J503 |
F
E
10
FRONT unit
FMAIN unit
F
CC
D
3 - 1