Pioneer PDR-W739 manual Marking recorded tracks to skip, With the recorder stopped, press

6 Finalizing and Erasing

ë￿

&#

$	Ý￿	COMPACT DISC RECORDER / MULTI-CD CHANGER ×óBÀö³²/
		￿

3-COMPACT DISC MULTI CHANGER

OPEN/CLOSE

0

COMPACT DISC DIGITAL RECORDER

REC/

REC MUTE

SKIP SKIP SET

COMPACT DISC RECORDER/ MULTI-CD CHANGER REMOTE CONTROL UNIT

CD-R CONTROL

4 1 Á ¢￿

7

Marking recorded tracks to skip

Although you can’t erase tracks on a CD-R disc, you can set what are called ‘skip IDs’. These tell a CD player (though many do not recognize skip IDs) not to play a particular track, but to skip to the next one on the disc.

You can also set skip IDs on CD-RWs, although it's probably a less useful feature since you can always erase the last track.

Once a skip ID is set, you can clear it, but be careful: you can set up to 21 skip IDs per disc, but repeatedly setting and clearing skip IDs in different recording sessions will reduce this number.

Setting skip IDs:

1With the recorder stopped, press

SKIP.

The display indicates that you’re in skip set/clear mode and playback starts.

DISC 1					TRK	MIN		SEC
DISC 2								CD-R
DISC 3
	ALL	FADER						ANA
		L
		–dB	8	40	18	6	0	OVER
X1		R

2Use the 4 and ¢ buttons to

select the track you want to skip.

The SKIP indicator lights if the track playing is already marked with a skip ID.

3Press SKIP SET.

The SKIP indicator starts to blink.

DISC 1				TRK
DISC 2							CD-R
DISC 3
ALL	FADER				SKIP		ANA
	L	8	40	18	6	0	OVER
X1	–dB
	R

•If the track you selected in step 2 above already had a skip ID set, playback jumps to the next track that doesn’t have a skip ID set.

•Use the 4and ¢buttons if you want to change the track again here.

•If there's no room left on the disc to record another skip ID, the display will show the message SKIP FULL.

4Press SKIP SET again to set the skip

ID for the track playing.

The SKIP indicator lights in the display once a skip ID has been set.

• To cancel, press 7.

5Set further skip IDs by repeating steps 2 to 4.

6When you're finished, press 7 to stop

the disc and press 0 (CD-R side).

Until you eject the disc, the recorder stores the skip ID information in its memory. On pressing 0, the recorder writes the skip ID information onto the disc.

Be careful: don’t switch off the unit before ejecting the disc—you’ll lose this sessions skip ID changes!

23