Pioneer PDR-W739 manual Skip ID for, Press Skip Clear, Display will show the message Skip Full

6 Finalizing and Erasing

ë￿

&#

$ Ý￿

SKIP

SKIP CLEAR

COMPACT DISC RECORDER/

MULTI-CD CHANGER

REMOTE CONTROL UNIT

COMPACT DISC RECORDER / MULTI-CD CHANGER	×óBÀö³²/
￿
		OPEN/CLOSE
3-COMPACT DISC MULTI CHANGER		0
		COMPACT DISC DIGITAL RECORDER
		REC/
		REC MUTE

CD-R CONTROL

4 1 Á ¢￿

7

Clearing skip IDs:

1With the recorder stopped, press

SKIP.

The display indicates that you’re in skip set/clear mode and playback starts.

DISC 1					TRK	MIN		SEC
DISC 2								CD-R
DISC 3
	ALL	FADER						ANA
		L
		–dB	8	40	18	6	0	OVER
X1		R

2Use the 4 and ¢ buttons to select the track you want to clear

the skip ID for.

The SKIP indicator lights if the track playing is marked with a skip ID.

3Press SKIP CLEAR.

The SKIP indicator starts to blink.

DISC 1				TRK
DISC 2							CD-R
DISC 3
ALL	FADER				SKIP		ANA
	L	8	40	18	6	0	OVER
X1	–dB
	R

•If the track you selected in step 2 above didn’t have a skip ID set, playback jumps to the next track that does.

•Use the 4and ¢buttons if you want to change the track again here.

•If there's no room left on the disc to clear a skip ID, the

display will show the message SKIP FULL.

4Press SKIP CLEAR again to clear the

skip ID for the track playing.

The SKIP indicator disappears once the skip ID has been cleared.

• To cancel, press 7.

5Clear further skip IDs by repeating steps 2 to 4.

6When you're finished, press 7 to stop

the disc and press 0 (CD-R side).

Until you eject the disc, the recorder stores the skip ID information in its memory. On pressing 0, the recorder writes the skip ID information onto the disc.

Be careful: don’t switch off the unit before ejecting the disc—you’ll lose this sessions skip ID changes!

24