Pioneer PDR-W739 manual Erasing a Cdðrw disc, Press Erase Press 41 or Á¢ to change Erase option

6 Finalizing and Erasing

COMPACT DISC RECORDER / MULTI-CD CHANGER

￿ ×óBÀö³²/

3-COMPACT DISC MULTI CHANGER

COMPACT DISC DIGITAL RECORDER

ERASE

CD-R CONTROL

4 1 Á ¢￿

67

Erasing a CDÐRW disc

Although more expensive than CD-R discs, the great advantage of CD-RW is that the discs can be erased and reused. Various erase options are available depending on whether or not the disc has been finalized.

A third, special option, erases (re-initializes) the whole disc. This process takes quite a long time to complete and should be used for recovering damaged discs, not for erasing tracks from a healthy disc.

Caution!

Never switch off the power during CD-RW erasing — your disc may become unusable. If there's a power failure or you do accidently disconnect the power, the recorder will try and re-initialize the disc once power is restored. Unfortunately, it may not be possible to complete the process successfully, and the disc may be damaged as a result.

If the message CHECK DISC appears any time during any erase process, hit eject, take out the disc, clean it, then try the erase command again.

Be sure to remove the disc from the recorder before switching off the power, otherwise the erase operation will not be completed.

When a non-finalized disc is loaded:

1Press ERASE.

2Press 41 (or Á¢) to change

the erase option.

Switch between:

• Erase just the last track

DISC 1
DISC 2							CD-RW
DISC 3
ALL	FADER						ANA
	L						ERASE
		8	40	18	6	0	OVER
X1	–dB
	R

• Erase all tracks

DISC 1
DISC 2							CD-RW
DISC 3
ALL	FADER						ANA
	L						ERASE
		8	40	18	6	0	OVER
X1	–dB
	R

• Erase multiple tracks (erase from track ... to track ... )

DISC 1
DISC 2							CD-RW
DISC 3
ALL	FADER						ANA
	L						ERASE
		8	40	18	6	0	OVER
X1	–dB
	R

Keep pressing 41(or Á¢) to change the ‘erase from’ track — the ‘erase to’ track is always the last track.

• Press 7to cancel erase here.

3Press 6 (CD-R side).

21