DAutomatic backlighting “bL”
This function is convenient for nighttime operation. The auto- matic backlighting turns the backlighting ON when pushing any key except for [PTT].
•The backlighting is automatically turned OFF after 5 sec. of inactivity.
Automatic backlighting ON (default)
DLCD contrast selection “LC”
The contrast of the LCD can be adjusted from 4 levels.
•1 (low contrast) – 4 (high contrast); 3 (default)
LCD contrast (default)
SET MODE 6
DAuto power save function “PS”
The power save function reduces current drain by deactivat- ing the receiver circuit for preset intervals.
Auto power save ON (default)
DSelf check function “SC”
The self check function checks transceiver conditions by it- self, and informs you in case a problem is found. The follow- ing items are checked after the power is turned ON, then it switches to operation mode.
•Temperature (Outside of
•Connected battery voltage
• Water intrusion
When error messages as shown |
|
below are displayed, see trouble |
|
shooting for advice (p. 23). | Self check OFF (default) |
Error messages |
|
Temperature error Battery voltage error Water intrusion error
15