Icom IC-M2A instruction manual Battery Charging, Battery charging, Battery cautions

Page 23

Battery charging

Prior to using the transceiver for the first time, the Ni-Cd bat- teries must be fully charged for optimum life and operation.

CAUTION: To avoid damage to the transceiver, turn it OFF while charging.

Recommended temperature range for charging:

+50°F to +104°F (+10°C to +40°C)

Use the supplied AC adapter (BC-147A/E or BM-95V) only. NEVER use other adapters.

NEVER connect DC power to the battery case when in- stalling alkaline batteries. Such a connection will damage the transceiver.

BATTERY CHARGING 7

Battery cautions

NEVER incinerate used Ni-Cd batteries. Internal battery gas may cause an explosion.

NEVER immerse batteries in water. If the battery case be- comes wet, be sure to wipe it dry BEFORE attaching it to the transceiver.

NEVER short terminals of the battery case. Also, current may flow into nearby metal objects so be careful when placing bat- tery cases in handbags, etc.

If your Ni-Cd batteries seem to have no capacity even after being charged, completely discharge them by leaving the power ON overnight. Then, fully charge the Ni-Cd batteries again. If the batteries still do not retain a charge (or very little), new batteries must be purchased.

DRecycling information (U.S.A. only)

The product that you have purchased contains a

rechargeable battery. The battery is recyclable. At

the end of its life, under various state and local laws, it may be illegal to dispose of this battery into the municipal waste stream. Call 1-800-822-8837 for bat-

tery recycling options in your area or contact your dealer.

17

Image 23
Contents IM2A Safety Training Information Case of Emergency Clean the Transceiver Thoroughly with FreshWord Definition Rwarning For U.S.A. only Table of Contents Radio licenses Operating RulesPriorities PrivacyFront, top and side panels 0PTT Switch PTTPanel Description To attach the battery case Battery Case Release Screw To remove the battery caseFunction display 0SUB Channel Readout 1BATTERY Indicator5CHANNEL Group Indicator p 6TRANSMIT Power IndicatorChannel 9 Call channel Basic OperationChannel selection ChannelWeather channels Adjusting the squelch levelLock function Push Y/Z to select the desired channel Rotate OFF/VOL clockwise to turn power onPush H/L to select the output power if necessary Receiving and transmittingAutomatic backlighting Call channel programmingDUALWATCH/TRI-WATCH Simulation DUALWATCH/TRI-WATCHDescription OperationNormal Scan Scan OperationScan types Priority ScanStarting a scan Setting tag channelsBeep tone bP SET ModeSET mode programming SET mode itemsMonitor action selection Sq Scan resume timer StPriority scan function Pr Auto scan function ASLCD contrast selection LC Auto power save function PSContrast of the LCD can be adjusted from 4 levels Automatic backlighting bLFunction Indication Switch Battery voltage indicator btMeter/RF meter indicator Sr Recycling information U.S.A. only Battery ChargingBattery charging Battery cautionsCharging connections Installing batteries Battery caseRapid charging with the BC-121N+AD-103 Optional battery chargersRapid charging with the BC-119N+AD-103 Handstrap Supplied Accessories and AttachmentsSupplied accessories Flexible antennaTo attach Swivel belt clipTo remove Problem Possible Cause Solution TroubleshootingChannel List Low power onlyOptions Specifications and OptionsSpecifications Kamiminami, Hirano-ku, Osaka 547-0003 Japan