Before Beginning Operations

OPERATIONS

1.Set the VOLUME control to minimum.

2.Set the POWER switch to ON.

3.Press the SPEAKERS button corresponding to the speaker system to be used.

4.Set the BALANCE control to the center position.

5.Set the DIRECT button to off.

6.Set the TAPE2 MONITOR button to off.

PLAYBACK PROCEDURES

1.Set the INPUT SELECTOR knob to the desired playback source.

ÖFor playback of a compact disc: Set to [CD].

ÖFor reception of an AM/FM broadcast: Set to [TUNER].

ÖFor playback of a record: Set to [PHONO].

ÖFor playback with the equipment connected to LINE terminals: Set to [LINE].

ÖFor playback of a tape: Set to [TAPE1/MD](on the A- 307R),TAPE1/CD-R/MD](on the A-209R).

NOTES:

ÖWhen you do not want to monitor the TAPE2 MONITOR sound, set the TAPE2 MONITOR button to OFF.

ÖWhen you select PHONO, the sound is muted for a few seconds.

2.Operate the equipment to begin playback.

3.Adjust playback volume with VOLUME control on this unit.

4.Adjust the tone to your preference using the BASS and TREBLE controls, and LOUDNESS but- ton.

RECORDING TAPES

1.Select the recording equipment with the INPUT SELECTOR knob.

2.Begin recording by operating the recording equip- ment and cassette deck.

Refer to the operating instructions of your cassette deck for proper operating procedures.

COPYING TAPES

When two decks are used, you can record the sounds from one deck onto the other.

Application examples:

ÖTo make a tape copy with contents identical to the original tape.

ÖTo edit a recording of an FM broadcast in order to cut out unwanted commercials, recording only of desired material onto another tape.

1.Load tapes for playback (pre-recorded tape) and recording (blank tape) into the respective cas- sette decks.

2.Select the copying direction with the INPUT SE- LECTOR knob and TAPE2 MONITOR button.

ÖWhen copying from the cassette deck of TAPE1/MD(on the A-307R) or TAPE1/CD-R/MD(on the A-209R) termi- nals to the cassette deck of the TAPE2 MONITOR terminals: Set the INPUT SELECTOR knob to TAPE1/ MD(on the A-307R),TAPE1/CD-R/MD(on the A-209R).

ÖWhen copying from the cassette deck of TAPE2 MONI- TOR terminals to the cassette deck of TAPE1/MD(on the A-307R),TAPE1/CD-R/MD(on the A-209R) termi- nals: Set the TAPE2 MONITOR button to ON and the INPUT SELECTOR knob to a position other than TAPE1/ MD(on the A-307R),TAPE1/CD-R/MD(on the A-209R).

3.Operate the cassette decks to begin copying.

Set the cassette deck with the original (playback) tape to the playback mode, and set the cassette deck with the blank tape to the recording mode.

TO USE THE COMPONENT CONNECTED TO THE TAPE2 MONITOR TERMINALS

[For a cassette deck]

ÖA cassette deck connected here can be operated in the same way (recording and playback) as a deck connected to the TAPE2 MONITOR terminals.

ÖAlso, if two decks are used, you can copy tapes from one deck onto the other (see the section “COPYING TAPES”).

1.Set the TAPE2 MONITOR button to ON.

2.Operate the cassette deck to perform playback (or recording).

NOTE:

The source selected with the INPUT SELECTOR knob is backed up for a few days even when the POWER switch is set to off or the power cord is unpluged.

After this period, the CD is automatically selected when the power is supplied.

[For an adaptor component]

By connecting a graphic equalizer, source sounds (from discs, tapes, AM/FM broadcasts, etc.) can be heard with added sound and tone compensation.

Sounds compensated with the adaptor component can be recorded on the cassette deck connected to the TAPE1/MD(on the A-307R) or TAPE1/CD-R/MD(on the A-209R) terminals.

1.Set the TAPE2 MONITOR button to ON.

2.Play back the source.

3.Operate the adaptor component.

NOTE:

Be sure to perform this operation with the adaptor component power switch in the on position. Even when not using the adaptor component, its power switch must be left on. If the adaptor component is switched off, no sound will be pro- duced, or the playback sound will be distorted.

A-307R A-209R specifications

The Pioneer A-307R and A-209R are two exceptional integrated amplifiers that showcase Pioneer's commitment to delivering high-quality audio performance for both audiophiles and casual listeners. Renowned for their excellent build quality and advanced technology, these amplifiers serve as a testament to Pioneer's legacy in the audio industry.

The A-307R is characterized by its robust design and powerful output capabilities. It boasts a substantial power rating of 100 watts per channel at 8 ohms, making it suitable for a wide range of speakers. This amplifier is engineered with an advanced power amplification system that ensures minimal distortion and a clean, dynamic sound. The A-307R features a high-quality phono stage, allowing users to connect turntables directly, which appeals to vinyl enthusiasts. The inclusion of a low-noise design ensures that the signal remains clean and clear, contributing to an excellent overall listening experience.

On the other hand, the A-209R presents a more compact and budget-friendly option while still maintaining many of the features found in higher-end models. Offering 80 watts per channel, the A-209R is also designed with a solid power amplifier section that provides rich, engaging sound. The simple yet effective user interface allows for easy navigation through various controls, including bass, treble, and balance adjustments, allowing users to tailor the sound to their taste.

Both models incorporate Pioneer's proprietary technologies, such as Direct Energy HD, which enhances audio fidelity by ensuring a direct and unadulterated signal path from the input to the output. This technology minimizes interference and provides a clearer, more detailed soundstage. Additionally, the amplifiers' build quality features a rigid chassis that reduces vibrations, further improving sound clarity.

In terms of connectivity, the A-307R and A-209R offer multiple input options, including CD players, tape decks, and auxiliary devices, making them versatile choices for various audio setups. The speaker terminals are robust and can accommodate a range of speaker wire gauges, ensuring secure connections.

Overall, both the Pioneer A-307R and A-209R deliver impressive performance, excellent sound quality, and user-friendly features. With their advanced technologies and solid construction, they represent a reliable choice for anyone looking to enhance their audio experience. Whether for casual listening or critical listening sessions, these amplifiers are sure to satisfy.