4 SCAN OPERATION
■Memory (lockout) scan
Memory scan repeatedly scans all programmed memory channels, except those set as lockout channels.
qPush [V/M] to select memory mode, if necessary.
•“ MR ” appears.
wPuch [SCAN] to start scan.
-To change the scan direction, push [Y] or [Z]. ePush [SCAN] again to stop the scan.
MEMORY LOCKOUT(SKIP) SCAN
SKIP
Mch 2 | Mch 3 | Mch 4 | Mch 5 | Mch 6 |
Mch 1 |
|
|
| Mch 7 |
Mch 19 | Mch 11 | Mch 10 | Mch 9 | SKIP |
Mch 8 |
■VFO (Full) scan
VFO scan repeatedly scans between the VFO’s lowest frequency and its highest frequency.
-To change the scan direction, push [Y] or [Z] during scanning.
DScan resume condition
When a signal is received during scanning, the scan pauses on the signal until it disappears, then resumes.
VFO SCAN (Full scan)
lowest | Start | highest | |
frequency | frequency | ||
| |||
|
| Scan | |
|
| Jump |
8