■Receiving and transmitting
CAUTION: Transmitting without an antenna may dam- age the transceiver.
qRotate [VOL] clockwise to turn power ON, then set to the 10 o’clock position.
wPush [V/M] to select memory mode or VFO mode.
eSelect the desired memory channel or VFO frequency with the [Y]/[Z] keys.
•When receiving a signal, “BUSY” appears and audio is emitted from the speaker.
•Further adjustment of [VOL] may be necessary at this point.
•Push [SQL] to toggle the squelch function ON and OFF. (p. 6)
•When the dial select function is selected, each push incre- ments/decrements the frequency either 100 kHz or 1 MHz. (p. 7)
rPush and hold [PTT] to transmit, then speak into the mi- crophone.
• Transmit indicator lights.
tRelease [PTT] to receive.
ïMemory ➾ VFO
Memory channel contents can be moved to VFO .
qSelect memory channel to be transferred:
➥Push [V/M] to select memory mode, if necessary.
➥Push [Y] or [Z] to select the memory channel.
BASIC OPERATION 3 
wPush [V/M] key for 2 sec. to transfer the memory contents to VFO.
-VFO mode is selected
NOTE:
•Only frequency data is transferred even if the memory channel has a memory name.
•When the preprogrammed memory frequency is outside the range of the preprogrammed VFO edges, an error beep tone sounds and no data is transferred.
qSet volume
r Push to transmit |
| |
t Release to | r Speak into | |
microphone | ||
receive | ||
| ||
w Select channel |
| |
or frequency |
| |
| w [SQL] switch |
5