ACCESSORY ATTACHMENT 1 
DAntenna
CAUTION: Transmitting without an antenna may damage the transceiver.
Insert the supplied antenna into the an- tenna connector and screw down the an- tenna as shown at right.
Keep the jack cover attached when jacks are not in use to avoid bad contacts from dust and moisture.
DBattery pack replacement
To remove:
Push and hold the bat- tery release downwards, then pull the battery pack upwards as shown at right.
To attach:
Mate the notched ends of the battery pack and the trans- ceiver, and push the battery pack until it clicks into place.
DBelt clip
Conveniently attaches to your belt.
To attach:
Slide the belt clip into the plastic loop on the back of the bat- tery case/pack.
To remove:
Push the top of the belt clip towards the transceiver and at the same time, push it downward and free of the plastic loop.
1