SEPARATING MAIN UNIT
In order to settle the touch terminal properly in a point of sale system, all the cable connections have to be routed through its base, either slim or universal. Therefore, please observe the procedures from A to C below to separate the main unit from both slim and universal base stand assembly after all cables in cable cover disconnected.
C | Step A: Prepare a soft clean flat surface, such | |
B | ||
as a piece of cloth on the desk to seat | ||
A | ||
the front surface of main unit | ||
C | Step B: Press the Lock/Release button for | |
main unit detach and meantime ... | ||
B | ||
Step C: Slide the base stand assembly to left to | ||
A | ||
| separate the main unit from base stand |
OPENING STAND ASSEMBLY
Take the adjustable stand assembly and turn it up side down to show the bottom of the base. Remove the bottom plate fixing screw and push the bottom plate aside as in left picture below for slim base and the middle picture
for universal base to open. | 12 1 | 2 | 13 |
Bottom Plate | Bottom Plate |
| |||||
Fixing Screw | Fixing Screw | 3 | |||||
|
|
|
|
| |||
Push |
|
|
|
|
|
| |
Bottom |
|
|
|
| |||
|
|
|
| ||||
Push Bottom | 5 | ||||||
Plate This | |||||||
Plate This Way |
| ||||||
|
|
|
| ||||
Way To Open | To Open |
|
Auxiliary
Cable Exit
2 6
6
7
2
Slim base bottom | Universal base bottom | Inside slim base |
Take the bottom plate up and the inside of an example slim base model looks like this in the above right picture. The inside of an example universal base model will look like the picture on next page. Both with numbered items listed on next page. However, there could be some variation to the contents inside depending on what option items actually installed.
Part 8