2 | 1 | 9 | 1. Cable Exit For External Connections | |
|
|
| ||
8 |
| 7 | 2. Base Box Screw 3. Cable tie | |
6 |
| 9 | 4. | |
| 5 | 5. Cable Passage To Main Unit For | ||
|
| |||
|
| 6 | Desktop Mount Application | |
3 |
| 6. HDD Bracket Fixing Screw | ||
|
| |||
4 |
| 2 | 7. Power Adaptor In Universal Base | |
10 | 11 | 8. HDD Bracket | ||
| ||||
Inside universal base | 9. Power Adaptor Bracket Fixing Screws | |||
|
|
| ||
10. UPS Battery Bracket | 11. UPS Battery Bracket Fixing Screw | |||
12. UPS Battery |
| 13. Velcro Strap | ||
|
|
| 6. Cable Passage To Main Unit For | |
Wall Mount Application
CABLE PASSAGE
Please route all cables through the cable passage to main unit in desktop mount application. Hold them together with the cable tie. Pass all cables (but those for HDD and UPS battery) through the cable exit to external connections. For slim base models in desktop mount application, when cable connection through a hole on desktop underneath the system is required, please slide open the auxiliary cable exit on bottom plate and route all external connections through this auxiliary exit. Then fix back the bottom plate if there is no option unit to install.
INSTALLING UPS BATTERY
The optional UPS battery is delivered in the carton if it is ordered. For slim base model, please place the UPS battery in the
direction shown in the right picture and use the Velcro strap through the 2 standing slits on base box to fix the battery in position firmly. Route the battery connection cable through appropriate passage to the battery connector
on the main unit.
Please remove the UPS
battery bracket fixing screw and slide right the UPS battery bracket to take it out for universal base model as in left picture. Put the battery in at the other end first and remount the bracket with its tongue matching under a bridge in the wall of base box from the right as arrowed in above left picture then apply the fixing screw. Please
Part 9