ACR Electronics PLB-350B, 2883, 2882 manual Preventing false alerts, False alert

Page 13

11. Preventing false alerts

A false alert is any activation of the beacon, intentional or otherwise, that does not result from a situation of grave and imminent danger.

Be sure to do the following to help minimize false alerts:

Register your beacon. This does not reduce false alert rates; however, when the beacon is properly registered, the situation can usually be resolved with a phone call.

Be careful with whom you leave your beacon. Make sure that they know how to use it, and that they understand the ramifications of causing a false alert. A lot of false alerts are generated by curious individuals. If you notice the beacon is flashing the red or green LED and “beeping” periodically on its own, this likely means it has accidentally been activated and needs to be shut off and reported.

Do not stow beacon while other gear is in contact with the keypad.

The Cospas-Sarsat satellites detect distress beacon transmissions immediately and locate the transmission within a few minutes of beacon activation.

NOTE: If you report a false alert and the authorities have not received the signal, do not be concerned. This may mean that you were able to deactivate the beacon before transmitting the signal.

12. False alert

A false alert must be reported to the search and rescue authorities.

False alerts in the US that are rectified must be reported to the US Air Force Rescue Coordination Center (AFRCC) to let them know that the situation has been corrected and everything is fine. Responsibly reporting these events to the AFRCC or your proper authority will not incur a penalty, but deliberate misuse or not notifying the proper authority may incur a severe penalty.

Reporting

Should there be a false alert for any reason, it must be reported to the nearest search and rescue authorities. The information that should be reported includes:

//The PLB 15-digit Unique Identifier Number (UIN)

//Time and date

//Duration and cause of activation

//Location of beacon at the time of activation

To report false alert in the United States, contact the AFRCC:

United States Air Force Rescue

Tel: 1-800-851-3051

Coordination Center (AFRCC)

 

Y1-03-0241A

12

Page 12 Page 14
Image 13
Page 12 Page 14
Contents Y1-03-0241A Please Read ALL Warnings Table of Contents Step ONE Registering Your Beacon How do I register? What country should I register in?Registration NOAA/NESDIS Suitland Road Suitland, MDHow your beacon brings help Step TWO HOW the Beacon WorksInternal GPS position system Front Back Anatomy of your beaconActivating your beacon Distinguishing PLB FeaturesKey Pad Functions PLB-350B406 MHz/121.5 MHz antenna position Activation 406 MHz and 121.5 MHzActivation with GPS GPS Receiver Location Turning off the beacon GPS receiver orientationFalse alert Preventing false alertsBattery Replacement Routine MaintenanceStep Three Maintaining Your PLB Self-TestSelf-Test Sequences Self-Test Guide Battery witness seal failureGPS Test Sequences max GPS Test Guide Minutes 50 seconds GPS acquisition testChanging ownership or contact information Multi-Function Belt Clip Appendix a AccessoriesAttachment Clip General overview Appendix B the COSPAS-SARSAT SystemGlobal Positioning System GPS MHz Transmitter Appendix C Technical SpecificationsLimited Warranty Appendix D WARRANTY, Useful Life POLICY, NoticesUseful Life Policy Notified Body EC Declaration of Conformity

PLB-350B, 2883, 2882 specifications

ACR Electronics is a renowned name in the field of emergency signaling and safety devices. Among its various offerings, the ACR 2882, ACR 2883, and the PLB-350B Personal Locator Beacons (PLBs) stand out due to their advanced features and reliability.

The ACR 2882 and 2883 models are compact and rugged PLBs designed for outdoor enthusiasts, sailors, and adventurers who venture into remote areas. One of their main features is the dual frequency capability, which operates on both 406 MHz and 121.5 MHz frequencies. This dual-frequency technology enhances their effectiveness in emergency situations, ensuring that distress signals can be received by both satellite systems and local search and rescue teams.

Both models are equipped with a high-performance GPS receiver, which significantly improves location accuracy. In challenging environments, where precise positioning is crucial, these PLBs can obtain a location fix quickly and share it with rescue services. The compact design, weighing around 7 ounces, makes them portable enough to carry on any adventure without adding significant weight to your gear.

Battery life is another critical feature of the ACR 2882 and ACR 2883. They utilize a lithium battery that can provide up to 24 hours of continuous operation upon activation. This extended battery life ensures that users have a dependable signal even in prolonged emergencies, and they can be easily tested and replaced when needed.

On the other hand, the PLB-350B stands out with its innovative design and user-friendly interface. It features an intuitive one-button activation system that allows users to signal for help swiftly. Its rugged construction is built to withstand harsh conditions, making it suitable for a variety of outdoor activities like hiking, fishing, or boating.

Additionally, the PLB-350B includes a built-in strobe light, which serves as a visual distress signal, further increasing the chances of rescue. Its battery is designed to last for up to 7 years, offering a reliable solution for safety without frequent maintenance requirements.

Collectively, the ACR 2882, 2883, and PLB-350B represent the cutting edge of personal safety technology. With their advanced communication capabilities, durable design, and user-friendly features, these devices are essential tools for anyone who values safety during outdoor adventures. They provide peace of mind knowing that help is just a button press away, no matter where you find yourself.
Top Page Image Contents