4.18 CLONING
The HX460S includes a convenient “Clone” feature, which allows the memory and configuration data from one transceiver to be transferred to another HX460S. Here is the procedure for Cloning one radio’s data to another:
1.Turn both radios off.
2.Connect the (optional)
3.Hold down the PRESET key and then turn on the transceiver. Do this for both transceivers (the order of switching the radios on does not matter); “c L n ” will appear on the display on both transceivers.
4.On the Destination transceiver, press the MEM key (“c r ” will appear on the LCD).
5.Press the 16/9 key on the Source transceiver; “c S ” will appear on the Source radio, and the data will now be transferred.
6.If there is a problem during the cloning process, “ c E ” will displayed. Check your cable connections and battery voltage, and try again.
7.If the data transfer is successful, the Destination transceiver will return to normal operation; Turn both transceivers off and disconnect the Clone cable. You can then turn the transceivers back on, and begin normal operation.
Page 20 | HX460S |