Standard Horizon HX460S owner manual Resetting the TRANSCEIVER’S Microprocessor

4.19RESETTING THE TRANSCEIVER’S MICROPROCESSOR

Resetting the microprocessor restores the initial, factory-supplied conditions in the transceiver. These are called the “default” conditions. To reset the microprocessor, first turn the transceiver off. Then, while pressing and hold- ing in the WX and SCAN keys, turn the transceiver on. The default condi- tions are:

• No channel numbers are in scan memory.

• Channel 16 is the priority channel.

• Channel 16 will be selected when the transceiver is turned on.

• WX channel 01 will be recalled when the WX key is pressed.

• Preset Channels are unassigned.

NOTE

The above procedure also resets the microprocessor. Perform this pro- cedure if an operational problem occurs which cannot be solved by nor- mal operating procedures.

HX460S Page 21