Standard Horizon HX460S Operating on Channel, Preset Channels a ~ E Instant Access, Programming

Page 17

4.12 OPERATING ON CHANNEL 13

Channel 13 is used at docks, bridges and for maneuvering in port. Mes- sages on this channel must concern navigation only, such as meeting and passing in restricted waters. In emergencies and when approaching blind river bends, high power is allowed. Holding down the H/L key will change the power output from 1 Watt ( ) to 5 Watts ( ); if pressed and held again

2.5Watts ( ) will be selected. When the PTT switch is released, the trans- ceiver will revert to low power. Press and hold in the H/L key again if you need High power on a subsequent transmission.

4.13 OPERATING ON CHANNEL 67

When channel 67 is used for navigational bridge-to-bridge traffic between ships, High or Medium power may be used temporarily (in the USA band) by pressing the H/L key. When the PTT switch released, the transceiver will revert to low power.

4.14 PRESET CHANNELS (A ~ E): INSTANT ACCESS

Five user-assigned channels can be programmed for instant access. Press- ing the PRESET key provides activates the user-assigned channel bank. If the PRESET key is pressed and no channels have been assigned, an alert beep will be emitted twice from the speaker.

4.14.1 Programming

Hold down the PRESET key, and press the [p] or [q] key (repeatedly, if necessary) until the desired channel number (from among the regular oper- ating channels) is displayed.

With the desired channel number displayed, release the PRESET key. The “A” notation will appear on the LCD display, indicating that the displayed channel is now saved in the Preset Channel A position.

Repeat steps 1 and 2 to program the desired channels into Preset Channels b ~ E.

To delete a Preset Channel, hold down the PRESET key and press the [p] or [q] key until the Preset Channel number to be deleted is displayed, then release the PRESET key.

HX460S

Page 15

Image 17
Contents VHF/FM Marine Handheld Transceiver HX460STable of Contents FCC Notice FCC/INDUSTRY Canada Informaton General InformationIntroduction Options AccessoriesPacking List Controls and Connections Controls and IndicatorsMIC/SP Jack Lamp KEYControls and Connectors WX KEY Preset KEYMEM KEY KEYIndicators MEM Indicator WX IndicatorBattery Indicator KEY Lock IndicatorOperation Initial SetupReception Transmission Transmit Time OUT Timer TOTScan USA, CANADIAN, and International BandsNoaa Weather Channels Priority Scan Channel Noaa Weather AlertEmergency Channel Programming Preset Channels a ~ E Instant AccessOperating on Channel SIMPLEX/DUPLEX Channel USE OperationSU-1 Operation Barometric Pressure MeterLP Lamp Mode Setup ModeBeP KEY Beep SCL Scan LampBoF Barometric Pressure Offset Requires optional SU-1 Bro Barometric Pressure Requires optional SU-1Cloning Resetting the TRANSCEIVER’S Microprocessor Battery REMOVAL/INSTALLATION BatteryBattery Charging FBA-23 Battery Case Using the NC-72 Battery ChargerDo not Short Battery Pack Terminals Battery SafetyTroubleshooting Chart MaintenanceTransmitter SpecificationsGeneral Receiver Memo HX460S 0 1 0 N 1 0