5.18.1 bEP (KEY BEEP)
Function: Enable/Disable the Keypad beeper.
Available Values: ON/OFF
Default: ON
5.18.2CHF (CHANNEL FREQUENCY)
Function: Enable/Disables the Channel Frequency display.
Available Values: ON/OFF
Default: OFF
5.18.3CHn (CHANNEL NAME)
Function: Changes the channel name shown on the display.
1.Select the channel on which you wish to change the name before recall- ing this Menu item.
2.Turn the radio off.
3.Hold down the SQL key, then turn on the transceiver while still holding down the SQL key.
4.“SEt” will appear on the display, indicating that the Setup Mode has been
activated.
5. Press the SQL key to select this Menu item “CHn.”
6. Press the [] or [] key to select the first character (letter, number, or symbol) in the name you wish to change, then press the MEM key to move to the next character.
7.Repeat step 6 as many times as necessary to complete the name tag (up to 12 characters).
8.After completing your adjustment, press the SQL key then PTT switch to save the new setting and exit to normal operation.
5.18.4 dUL (DW DISPLAY)
Function: Selects the Dual Watch scanning display mode.
Available Values: Normal/Special
Default: Special
When “Special” is selected, channel number which is the LCD shows re- ceived channel.
Page 28 |
| HX370S |
|