5.18.5 LP (LAMP MODE)
Function: Select the LCD/Keypad Lamp mode.
Available Values: KEY/Cnt (Continue)/OFF
Default: KEY
KEY: Illuminates the LCD/Keypad for 5 seconds when any key is pressed.
Cnt (Continue): Illuminates the LCD/Keypad continuously.
oFF: Disables the LCD/Keypad illumination.
Key | Continue | Off |
5.18.6 SnL (SCAN LAMP)
Function: Enable/Disable the Scan lamp while scanning is paused.
Available Values: ON/OFF
Default: ON
5.18.7SCn (SCAN DISPLAY)
Function: Select the display mode while scanning.
Available Values: nor (Normal)/SPL (Special)
Default: nor (Normal)
nor (Normal): The channel number changes when scanning.
SPL (Special): The channel number only changes when the radio receives a transmission. This lets you see the last channel on which someone called.
NormalSpecial
5.18.8SCr (VOICE SCRAMBLER) [Requires optional FVP-31]
Function: Enable/Disable the Voice Scrambler.
Available Values: OFF/SC0/SC1/SC2/SC3
Default: OFF
Off | Code “SC1” | Code “SC2” | Code “SC3” | |
|
|
|
|
|
HX370S |
|
|
| Page 29 |
|
|
| ||